JVC CA-D672TR manual Standard Recording, To Record Any Sound Source To Tape

Page 33

Standard Recording

English

DUBBING

REC

CD REC START

START/STOP

REC PAUSE

This is the basic method for recording any source. The CA-D672TR also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combin- ing selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from VCR with this procedure.

To Record Any Sound Source To Tape —————————————————

Follow these steps to record from any sound source onto a tape in Deck B.

Using the Unit

1. Insert a blank or erasable tape into Deck B.

2. Press the REVERSE MODE button if you want to record on both sides of the tape.

Reverse Mode comes on.

❏When using Reverse Mode, insert the tape so that it will be recorded in the forwards 3 direction.

3.Check the recording direction for the tape.

Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the directions are different, press the 7button after pressing the Û or Ü button to set the tape direction.

❏When using Reverse Mode to record both sides of a tape, check that the Tape Direction indicator is in the forwards 3direction. If the direction indicator is not in the forwards 3 direction, press the Übutton then press the 7button.

4.Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

5.Press the REC START/STOP button.

The Recording indicator light comes on and the CA-D672TR begins recording.

Using the Remote Control

1. Insert a blank or erasable tape into Deck B.

2. Press the REC PAUSE button.

The Recording indicator light comes on.

3. Press the REVERSE MODE button on the Unit if you want to record on both sides of the tape.

Reverse Mode comes on.

❏When using Reverse Mode, insert the tape so that it will be recorded in the forwards 3 direction.

4.Prepare the source by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

5.Press the ªor £button.

Recording starts in the direction of the button pressed.

❏When using Reverse Mode to record both sides of a tape, press the £button.

CAUTION: Operations other than using AUTO POWER OFF, the SLEEP timer or changing the CD for the other disc trays, may cause the recording source to be changed.

If you are recording an AM (MW/LW) broadcast and you hear

1

 

interference, move BEAT CUT switch on the back panel from

 

BEAT

 

 

 

 

 

 

position 1 (the normal mode) to position 2.

 

 

 

 

CUT

 

2

 

 

 

 

 

29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents CA-D672TR If in Doubt Consult a Competent ELECTRI- Cian CA-D672TR Class Laser Product How This Manual Is Organized FeaturesTable of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedRight speaker Connecting a VCRAudio OUT AudioAdjusting the Brightness of the Display Demo ModeOn the Remote Control To turn the Demo display on, press the Demo buttonTurning the Power On and Off Using the AmplifierDisplay Turning the CA-D672TR OnBass Mode Adjusting the VolumeBalance adjustment Fade Muting FunctionSound Modes Customizing a Sound Mode Using a VCR Auto Power OffListening to a VCR Recording to a VCRTuning In a Station Using the TunerSwitching between Frequency Bands One Touch RadioPresetting Stations To Change the FM Reception ModeSelecting a radio station What Information RDS can Provide Receiving FM Stations with RDSPS Programme Service Changing the DisplayStation Frequency EON Function Setting EON Standby reception Press the EON ON/OFF buttonPress the PTY Select button to choose a PTY News NewsBlinking Alarm functionCancel SET Multi Control Using the CD PlayerDisc indicator Disc displayPower comes on, and operations are done automatically Basics of Using the CD Player Continuous PlayTo Insert Discs Place a CD, with its label side up, onto the trayTo Play a Disc ResumeTo Change Discs While Playing To Select a Track Programming the Playing Order of the TracksTo Select a Passage Within a Track Press the PROGRAM/RANDOM buttonDisc Track Step Number number number Select a disc with the Disc buttons 1 toPress the Ü/8or CD button Select a disc with the Disc buttonsRandom Play Mode displayTo Check the Program To Modify the ProgramTray Lock Function Repeating a Selection or the DiscsLocking the Electronic Lock Unlocking the Electronic LockTape Direction Indicator on the Display Using the Cassette Deck Listening to a TapeDeck Control buttons TapeRegular Play One Touch PlayFast Left and Fast Right Reverse Mode on Other Useful Features of the Cassette DeckMusic Scan Press the 1or Ábutton during playThings To Know Before You Start Recording Using the Cassette Deck RecordingEdit DubbingStandard Recording To Record Any Sound Source To TapeCheck the recording direction for the tape CD Direct Recording Auto Edit Recording Press the Disc button for the disc you want to recordDubbing REC CD REC Start 6. Press the CD REC Start button How to Use the Dubbing Button Tape to Tape Recording DubbingPress the Dubbing button Setting the Clock Using the TimersMulti Control SET Cancel Press the TIMER/CLOCK buttonProcedure For Setting the Daily Timer Setting the Daily TimerPress the TIMER/CLOCK button again Set the time you want the Unit to turn onTo use a CD as the source To use a Cassette Deck as the sourceTo use another source Setting the Volume Level Turning the Daily Timer On and OffTo change the Daily Timer setting SET 7. Press the SET buttonSetting the REC Recording Timer Turning the REC Timer On and Off Setting the Sleep TimerTo set the Sleep Timer, follow this procedure To Change the Sleep Timer SettingOFF Timer PriorityCare And Maintenance Troubleshooting SymptomPossible Cause Action Specifications EN, GE, FR, NL, SP, IT JVC 0298HHMFLEJEM
Top Page Image Contents