35.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the Butterfly Upright (1) with a 3/8” x 4” Bolt (59), a 3/8” Flat Washer (48), and a 3/8” Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place.
36.Wrap the Weight Cable (72) around a 3 1/2” Pulley
(24).Attach the 3 1/2” Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut
(50)that was removed in step 23. Be sure that the
Cable Trap is turned to hold the Cable in place.
37.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place.
38.Note: For convenience, the weights assembled in step 9 are not shown in the following draw- ings.
Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place.
15
35 |
| 1 |
|
|
|
|
|
| |
|
|
|
| 59 |
|
|
| 25 | 24 |
|
|
| 72 | |
|
|
|
| |
| 63 | 48 |
|
|
|
|
|
| |
36 |
| 73 |
|
|
|
| 54 |
|
|
|
|
|
| 23 |
|
| 25 |
| 50 |
|
|
|
| |
|
| 24 |
|
|
|
| 72 |
|
|
37 |
|
|
|
|
|
|
|
| 24 |
|
|
| 25 | 57 |
|
|
|
| |
|
|
|
| 72 |
|
| 63 Bracket |
| |
|
|
| 4 |
|
38 |
|
|
|
|
|
| 72 |
|
|
|
|
| 57 |
|
|
|
| 24 |
|
|
| 25 |
|
|
|
| 63 |
|
|
|
| Bracket | 4 |
|