Weider WESY37531 user manual

Page 18

47.Remove the 3/8” Nylon Locknut (50) from the indi- cated 3/8” x 5 1/2” Bolt (55).

Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24). Secure the 3 1/2” Pulley and a Cable Trap (25) to the 3/8” x 5 1/2” Bolt (55) on the indi- cated side of the Press Base (6) with the 3/8” Nylon Locknut (50). Be sure the Cable Trap is oriented to hold the Cable in place.

Press a 2 1/2” Square Inner Cap (76) into the Press Base (6).

48.Remove the 3/8” Nylon Jamnut (63) from the indi- cated 3/8” x 4 3/4” Bolt (60).

Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24) in the direction shown. Secure the 3 1/2” Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indicated side of the Press Leg Lever (90) with the 3/8” Nylon Jamnut (63). Be sure the Cable Trap is oriented to hold the Cable in place.

49.Remove the indicated 3/8” Nylon Locknuts (50).

Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi- cated side of the Press Seat Frame (7) with the first 3/8” Nylon Locknut (50).

Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi- cated side of the Press Frame (8) with a 3/8” Nylon Locknut (50).

Be sure the Cable Traps (25) are oriented to hold the Cable (75) in place.

50.Remove the indicated 3/8” Nylon Locknut (50).

Attach the Leg Press Cable (75) to the 3/8” x 3 1/4” Bolt (62) on the indicated side of the Press Upright

(2) with the 3/8” Nylon Locknut (50).

18

47

 

76

 

 

24

55

 

25

 

6

50

75

48

 

60

 

90

75

 

25

63

24

 

49

 

7

 

60

25

 

24

25

50

 

24

75

8

 

50

 

2

 

 

62

 

50

 

75

Image 18
Contents QUESTIONS? Model No. WESY37531 Serial NoTable of Contents Important Precautions Using the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before Assembly Make Assembly EasierFrame Assembly Nylon Locknuts yetDo not tighten the Nylon Locknuts 50 yet Do not tighten the Nylon Locknuts yet Locate and open the parts bag labeled ARM Assembly Tighten the Nylon Locknuts 50 used in stepsPage Cable Assembly Nylon Jamnut the Leg Lever must pivot easilyTrap is turned to hold the Cable in place Page Weight Cable is in the groove of the 3 1/2 Pulley Cable Trap is turned to hold the Cable in place Cable Trap is turned to hold the Cable in place Locknut yet Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyPage Adjustments Changing the Weight SettingAttaching the AB Strap to the AB Pulley Station Weight Resistance Chart PlatesTroubleshooting Tightening the CablesCable Diagrams Weight Cable Cable ID Stack Low Pulley Page 2 Square Inner Cap 3 Inner Cap 2 x 2 1/2 Inner Cap Part Identification CHART-Model No. WESY37531 R1003AX 4 Bolt X 4 3/4 Bolt X 5 1/2 Bolt Part LIST-Model No. WESY37531 Qty DescriptionModel No. WESY37531 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT