Weider WESY37531 user manual Cable Diagrams

Page 25

CABLE DIAGRAMS

The cable diagrams on this page and the next page show the proper routing of the Leg Press Cable (75), the Ab Cable (47), the Butterfly Cable (73), and the Weight Cable (72). Use the diagrams to be sure that the Cables have been assembled correctly. The starting and ending points of each Cable have been labeled. The numbers show the proper route for each Cable. IMPORTANT: If the Cables have not been correctly routed, the weight system will not function properly and damage may occur.

Leg Press Cable (75)

 

 

6

 

9

 

10

11—Press Upright

 

 

7

5

 

3

 

2

 

 

8

1—Press Upright

 

 

 

4

 

 

Ab Cable (47)

Butterfly Cable (73)

2

4

5

1—High Pulley

6—Ab Pulley

3

25

4

5—Left Arm

2

1—Right Arm

3

Image 25
Contents Model No. WESY37531 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Using the weight system. If you have additionalFor your benefit, read this manual carefully before Make Assembly Easier AssemblyNylon Locknuts yet Frame AssemblyDo not tighten the Nylon Locknuts 50 yet Do not tighten the Nylon Locknuts yet Tighten the Nylon Locknuts 50 used in steps Locate and open the parts bag labeled ARM AssemblyPage Nylon Jamnut the Leg Lever must pivot easily Cable AssemblyTrap is turned to hold the Cable in place Page Weight Cable is in the groove of the 3 1/2 Pulley Cable Trap is turned to hold the Cable in place Cable Trap is turned to hold the Cable in place Locknut yet Page Locate and open the parts bag labeled Seat Assembly Seat AssemblyPage Changing the Weight Setting AdjustmentsAttaching the AB Strap to the AB Pulley Station Plates Weight Resistance ChartTightening the Cables TroubleshootingCable Diagrams Weight Cable Cable ID Stack Low Pulley Page 2 Square Inner Cap 3 Inner Cap 2 x 2 1/2 Inner Cap R1003A Part Identification CHART-Model No. WESY37531X 4 Bolt X 4 3/4 Bolt X 5 1/2 Bolt Qty Description Part LIST-Model No. WESY37531Model No. WESY37531 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT