Cable Assembly

31.Attach the end of the Low Cable (23) to the Long “U”-Bracket (57) with a 1/4” Nylon Locknut (2) and a 1/4” Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing.

32.Attach the High Cable (58) to a Small “U”- Bracket (71) with a 1/4” Nylon Locknut (2) and a 1/4” Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.

Attach the Small “U”-Bracket (71) to the Short Weight Tube (108) with a 5/16” x 1 3/4” Bolt (24) and a 5/16” Nylon Locknut (3).

33.Locate the Military Press Cable (72). Attach the Military Press Cable to the other Small “U”-Bracket (71) with a 1/4” Nylon Locknut (2) and a 1/4” Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.

Attach the Small “U”-Bracket (71) to the Long Weight Tube (63) with a 5/16” x 1 3/4” Bolt (24) and a 5/16” Nylon Locknut (3).

31
		2	57
		2
	2	10
		10
	10		23
23	57
23
32
	58
	3
	71
	108		24
			10
71	58		2
	58

	10
	2
33			72
			72
	3
			71
			24
	63
	72		10
71	72
71			2
			2
	10
	2

31
		2	57
		2
	2	10
		10
	10		23
23	57
23
32
	58
	3
	71
	108		24
			10
71	58		2
	58

	10
	2
33			72
			72
	3
			71
			24
	63
	72		10
71	72
71			2
			2
	10
	2

31
		2	57
		2
	2	10
		10
	10		23
23	57
23
32
	58
	3
	71
	108		24
			10
71	58		2
	58

	10
	2
33			72
			72
	3
			71
			24
	63
	72		10
71	72
71			2
			2
	10
	2

31
		2	57
		2
	2	10
		10
	10		23
23	57
23
32
	58
	3
	71
	108		24
			10
71	58		2
	58

	10
	2
33			72
			72
	3
			71
			24
	63
	72		10
71	72
71			2
			2
	10
	2