Weider WESY49310 user manual Important Precautions, Apply the decal, Location shown

Page 2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the weight system.

1.Read all instructions in this manual and in the accompanying literature before using the weight system.

2.It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions.

3.Use the weight system only on a level sur- face. Cover the floor beneath the weight sys- tem to protect the floor.

4.The weight system is intended for home use only. Do not use the weight system in a com- mercial, rental or institutional setting.

5.Keep children under 12 and pets away from the weight system at all times.

6.Keep hands and feet away from moving parts. Always wear athletic shoes for foot protection.

7.Never release the press arm, butterfly arms, military press arm, leg lever, leg press plate, lat bar or nylon strap when weights are raised. The weights will fall with great force.

8.Keep your hands away from the assist upright when the assist arm is being used. Your hand could become pinched between the assist upright and the assist arm.

9.Keep your hands away from the leg press upright when the military press arm is being used. Your hand could become pinched between the leg press upright and the mili- tary press arm.

10.Always stand the a foot plate when perform- ing an exercise that could cause the weight system to tip.

11.Always disconnect the lat bar from the weight system when performing an exercise that does not use the lat bar.

12.Always be sure that your body weight is fully supported by the dip arms or the pull-up arms before kneeling on the assist arm. The assist arm can drop quickly when your body weight is placed on it.

13.The weight system is designed to support a maximum user weight of 250 lbs.

14.

Make sure that the cables remain on the pulleys at all times. If the cables bind while you are exer- cising, stop immediately and make sure that the cables are on all of the pulleys.

15.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

16.Inspect and tighten all parts often. Replace any worn parts immediately.

17.The decals shown below have been placed on the weight system in the location shown on page 3. If a decal is missing or illegible, call our toll-free Customer Hot Line at 1-800- 999-3756 and order a free replacement decal.

Keep hands and fingers clear of this area.

Warning Decal 2

 

 

 

 

 

 

 

• Keep clear of

 

 

 

 

 

 

 

this area.

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning Decal 3

 

 

 

 

 

 

 

 

 

 

 

 

Apply the decal in the

Warning Decal 1

location shown.

 

 

 

 

 

 

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

2

Image 2
Contents Table of Contents QUESTIONS?Location shown Important PrecautionsApply the decal Dimensions Before YOU BeginFollowing Tools not Included are Required for Assembly AssemblyFrame Assembly Frame AssemblyNylon Locknuts yet Weights 25 until is complete Tighten all Nylon Locknuts used in stepsTube is sitting in the pin grooves in the top Weight Frame Assembly ARM Assembly ARM AssemblyDo not tighten the Nylon Locknut yet 101 Bracket 105 106 107 ARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freely102 Move smoothly Locate the Low Cable 23. Route the LowPulley and the crossbar on the Press Cable Assembly Cable Assembly Must be inserted from the side shown Locate the Leg Press Cable 99. Attach Seat Assembly Locate and open the parts bag labeled Seat AssemblySeat Assembly Seat Assembly Decal HOW to USE the Weight System Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesHigh Cable Cable DiagramsHigh Cable 58 and Low Cable Low CableMilitary Press Cable 72 and Leg Press Cable Pivot Arm Leg Press CableWESY49310 R0901A 16 x 3 Bolt Page Part LIST-Model No. WESY49310 Qty DescriptionExploded DRAWING-Model No Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty