PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly.The number in parentheses below each drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small parts may have been
@@
M6 Nylon Locknut (69)
M8 Flange Nut (19) | MI0 Nut (47) |
M10 Lock Washer (103)
©8
19ram Round Inner Cap (78)
M8 Nylon Locknut (65) M10 Nylon Locknut (76) M8 Washer (59)
25mm Square Inner Cap (54) | M10 Washer (75) |
38mm Round Inner Cap (38)
45mm Square Inner Cap (42)
38mm x 64ram Inner Cap (41)
50mm Square Inner Cap (98) | 38mm x 76turn Inner Cap (99) |
|