i2. Press two 25mm Square Inner Caps (54) into the indicated end of the Backrest Frame (15).
Attach a Plastic Foot (53) to the Backrest Frame (15) with an M4 x 16ram Screw (62).
12
SS. 53
Attach the two Guard Plates (17) to the inside of the Backrest Frame (15) with four M4 x 16mm
Screws (62).
13.Odent the Backrest (14) and the Backrest Backing (8) as shown. Attach the Backrest and the Backrest Backing to the Backrest Frame (15) with four M6 x 45mm Bolts (58).
14.Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.
L=-li :joo
17_/_ L"
17
13
14
14
L' 62
15.Attach the two
(20)to the
Attach the two
Caps (79) to the
_% | Roa : |
15
96
100
9