Electrolux 74640 manual Quantities of detergent and conditioners?, Water softening

Page 16

Operating Instructions

Detergent and Conditioners

 

Which detergent and conditioners?

 

Only use detergents and conditioners that are suitable for use in wash-

 

ing machines. Always follow the manufacturer's instructions.

 

Quantities of detergent and conditioners?

 

The quantity to be used will depend on:

 

• degree of soiling of the washing

 

• degree of hardness of the water supply

 

• load

2

If the manufacturer does not indicate the amounts to use for smaller

 

loads, for half-loads use a third less than the amount recommended for

a full load, and for smaller loads and EASY IRON use half the amount recommended for a full load.

Please follow the detergent and conditioner manufacturers’ instruc- tions for use and dosing recommendations.

Water softening

For medium to high water hardness (hardness class II upwards) a water softening agent can be used. Refer to the manufacturer's instructions. Then always add the appropriate amount of detergent (underdosing) for hardness class I (soft). Your local Water Authority can advise you on the hardness of the water in your area.

Water hardness details

Hardness class

Water hardness in °dH

Water hardness in ppm

(German hardness scale)

(Parts Per Million)

 

I - soft

0 - 7

to

125

II - medium hard

7 - 14

125

- 250

III - hard

14 - 21

250

- 375

IV - very hard

greater than 21

greater than 375

 

 

 

 

16

Image 16
Contents ÖKO-LAVAMAT 74640 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washMent products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Programme Tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ To set the additional rinse functionChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG