Electrolux 74640 manual Opening and closing the door, Loading the washing, Close the door firmly

Page 21

Operating Instructions

Opening and closing the door

0 Open: Pull the handle on the door.

0Close: Press the door firmly closed.

The displays DOOR and START/PAUSE show when the appliance is switched on whether the door can be opened:

	DOOR Indicator	Display START/PAUSE	Door opening possible?
	lights up green	flashes red	yes
	lights up green	lights up red	yes, after the START/PAUSE
	lights up green	lights up red	key is pressed
			key is pressed
	is off	flashes red	no1)
	is off	or lights up red	no1)
		or lights up red

	1) The door is locked because of a high water level or high temperature
3	If
	– the display DOOR flashes red,

–then the error code E40 flashes in the multi display,

–and the MAIN WASH display flashes,

an attempt was made to start a washing programme without the door being correctly closed. In this case, press the door firmly closed and start the washing programme again.

Loading the washing

3	See "Programme Tables" for maximum loads.
	For information about the correct preparation of the washing see "Sort

and prepare washing".

01. Sort and prepare the washing according to type.

2.Open the door: Pull the handle on the door.

3. Load the washing.

Important! Do not trap washing when closing the door. The fabrics and the ma- chine could be damaged.

4. Close the door firmly.

21

Image 21

Contents ÖKO-LAVAMAT 74640 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CProgramme option buttons Ment products are only effective at higher temperaturesWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingConsumption data What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration Loading the washing Opening and closing the doorSee Programme Tables for maximum loads Close the door firmlyAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingCancelling the additional rinse function When the water is completely drainedAdditional Rinse RINSE+ To set the additional rinse functionCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG