Electrolux 74640 manual Installation and connection instructions, Installation Safety Precautions

Page 40

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

Always insert the plug into a correctly installed earthed socket.

Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

Any electrical work required to install this appliance should be carried out by an electrician or competent person.

40

Image 40
Contents ÖKO-LAVAMAT 74640 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washMent products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Programme Tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ To set the additional rinse functionChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG