Electrolux 74640 manual Setting the delay timer / soaking duration, Delay timer, Soaking duration

Page 20

Operating Instructions

Setting the delay timer / soaking duration

 

Delay timer

 

The DELAY TIMER button allows the start of a

 

washing programme to be delayed by 1 hour up

 

to a maximum of 19 hours.

0

To do this, press the DELAY TIMER button

 

repeatedly until the desired start delay is

 

 

 

 

 

 

 

shown in the multi display, for example

 

12h for a 12 hour delay.

 

 

 

If 19h is displayed and you press again, 0h ap-

 

 

 

pears, followed by the duration time of the set

 

programme (displayed in minutes e. g.126). In

 

this state the start delay timer is not set.

3

Once the delay timer has been set, it will only be activated after press-

 

ing the START/PAUSE button.

 

Soaking duration

 

When the SOAKING button is pressed, you can extend the soaking pe-

 

riod with the DELAY TIMER button (maximum 10 hours and

 

approx. 20 minutes).

3

Without DELAY TIMER, the soaking period is approximately 30 minutes,

 

plus a pre-wash time of 20 minutes.

0To adjust, press the DELAY TIMER button as often as necessary until the required soaking period is shown in the multi display, e.g.1h (=1 hour).

After approximately 2 seconds, the multi display shows the duration in minutes.

 

This duration time is made up as follows:

 

 

 

 

Selected soaking period

e.g.

1h =60 Minutes

 

+ Heating-up / pre-wash time

e.g.

Approx. 20

Minutes

 

+ Duration of the selected wash programme e.g.

Approx. 126

Minutes

 

= Displayed value

e.g.

Approx. 206

Minutes

3

While SOAKING is running, PRE WASH lights up on the programme

 

progress display.

 

 

 

20

Image 20
Contents ÖKO-LAVAMAT 74640 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washMent products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataSorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Multi-display Washing Programme ProgressProgramme progress display Selecting the programme options Changing or cancelling the wash programmeChanging the washing programme Washing cycle is complete/Removing the washing Programme Tables WashingSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ To set the additional rinse functionChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG