Electrolux 74640 manual Water tap is closed Open the water tap No water flows

Page 33

 

 

 

Operating Instructions

 

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

 

Water tap is closed.

Open the water tap.

 

 

No water flows.

 

Close the water tap. Unscrew

 

 

Filter in screw connection of

the hose from the tap, re-

 

 

Fault code E10 ap-

 

 

the inlet hose is blocked.

move the filter and clean un-

 

 

pears. The display

 

 

 

der running water

 

 

RINSE + flashes

 

 

 

 

 

 

 

 

Water tap is blocked with

Check the water tap and

 

 

 

limescale or is faulty.

have it repaired if necessary.

 

 

 

The transport packaging has

Remove transport packaging

 

 

 

according to the installation

 

 

 

not been removed.

 

 

 

and connection instructions.

 

 

 

 

 

 

 

 

Adjust the feet according to

 

 

 

The machine is not level.

the installation and connec-

 

 

 

 

tion instructions.

 

 

The washing machine

There is very little washing in

This does not impair the op-

 

 

vibrates during opera-

 

 

tion or is unstable.

the drum (e.g. only one

eration of the machine.

 

 

dressing gown).

 

 

 

 

 

 

 

The water could not be com-

Check the the drain hose and

 

 

 

remove any kink if necessary,

 

 

 

pletely pumped out before

or clean the drain pump and,

 

 

 

spinning because the drain-

 

 

 

if required, remove foreign

 

 

 

age hose is kinked or the

 

 

 

bodies from the pump hous-

 

 

 

drain pump is blocked.

 

 

 

ing.

 

 

 

 

 

 

 

 

It may be necessary to re-

 

 

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

 

 

gent used. Follow the

 

 

ing the main wash.

was used.

detergent manufacturer's

 

 

 

 

 

 

 

 

recommendations.

 

 

 

 

 

 

 

 

 

 

 

33

Image 33
Contents ÖKO-LAVAMAT 74640 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CProgramme option buttons Ment products are only effective at higher temperaturesWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingConsumption data What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration Loading the washing Opening and closing the doorSee Programme Tables for maximum loads Close the door firmlyAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingCancelling the additional rinse function When the water is completely drainedAdditional Rinse RINSE+ To set the additional rinse functionCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG