Electrolux 74640 manual Changing the spin speed/Selecting the rinse hold function

Page 19

Operating Instructions

Changing the spin speed/Selecting the rinse hold function

 

If required, change the spin speed for the final

 

spin/select rinse hold:

 

 

 

Changing the spin speed

 

 

0

Continue pressing the spin speed/RINSE HOLD but-

 

ton until the indicator for the desired spin speed is

 

illuminated.

 

 

 

 

 

3

If you do not change the spin speed, the final spin

 

will be adjusted automatically depending on the

 

type of wash cycle:

 

 

 

– COTTONS/LINEN

1400 revolutions per minute

 

– EASY CARES / EASY IRON

900 revolutions per minute

 

– DELICATES

700 revolutions per minute

 

– WOOL /P (hand wash)

900 revolutions per minute

The speed for the intermediate spin cycle is dependent on the wash cy- cle selected and cannot be altered.

Selecting the rinse hold function

0Continue pressing the spin speed/RINSE HOLD button until the RINSE HOLD indicator is illuminated.

3

If RINSE HOLD is selected, the washing will remain in the final rinse wa-

 

ter and will not be spun.

The washing will not be spun throughout the entire wash cycle. As a re- sult the cycle is a very quiet one. RINSE HOLD is therefore especially suitable for washing at night.

19

Image 19
Contents ÖKO-LAVAMAT 74640 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CShortened main wash cycle for lightly soiled washing Ment products are only effective at higher temperaturesProgramme option buttons Warm pre wash before the main washing cycleConsumption data What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsOr for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingTo set the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG