Electrolux 74640 Electrical Connection, Measures not be observed, Earth Blue Neutral Brown Live

Page 45

Installation and connection instructions

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1

WARNING - THIS APPLIANCE MUST BE EARTHED.

 

 

 

 

 

 

 

The manufacturer declines any liability should these safety

 

measures not be observed.

 

 

 

 

 

 

 

Before switching on, make sure

 

 

 

 

 

 

 

the electricity supply voltage is

 

 

 

 

 

 

 

the same as that indicated on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appliance rating plate.

 

 

 

 

 

 

 

The rating plate is located at the

 

 

 

 

 

 

 

top of the rim of the open door.

 

 

 

 

 

 

 

The appliance is supplied with a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13amp plug fitted. In the event of

 

 

 

 

 

 

 

having to change the fuse in the

 

 

 

 

 

 

 

plug supplied, a 13amp ASTA ap-

 

 

 

 

 

 

 

proved (BS 1362) fuse must be used.

 

 

 

 

 

 

 

Should the plug need to be replaced

Green & Yellow

 

for any reason, proceed as described

 

 

 

 

 

 

 

below.

 

 

 

 

 

 

 

 

 

 

 

 

The wires in the mains lead are

 

 

 

 

 

 

 

coloured in accordance with the

 

 

 

 

 

 

 

following code:

Blue

 

 

 

 

Brown

 

 

 

 

 

 

 

Green and Yellow:

Earth

 

 

 

 

 

 

 

Blue:

Neutral

 

 

 

 

 

 

 

Brown:

Live

Cord Clamp

 

 

 

 

 

 

 

The wire coloured green and yellow must be connected to the termi-

nal marked with the letter “E“ or by the earth symbol or coloured green and yellow.

The wire coloured blue must be connected to the terminal “N“ or coloured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

45

Image 45
Contents ÖKO-LAVAMAT 74640 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CProgramme option buttons Ment products are only effective at higher temperaturesWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingConsumption data What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration Loading the washing Opening and closing the doorSee Programme Tables for maximum loads Close the door firmlyAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingCancelling the additional rinse function When the water is completely drainedAdditional Rinse RINSE+ To set the additional rinse functionCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG