Electrolux 74640 manual Inlet hose is leaking Connection

Page 34

Operating Instructions

Problem

Possible Cause

Remedy

 

The screw connection on the

Tighten the inlet hose screw

 

inlet hose is leaking.

connection

 

The drainage hose is leaking.

Check the drainage hose and

 

replace it if necessary.

 

 

 

The washing drain pump

Close cover correctly.

 

cover is not correctly closed.

 

 

Water runs out from

 

Stop the programme and re-

Washing is caught in the

move the washing caught in

under the washing ma-

chine.

door.

the door. Restart the

 

programme.

 

 

 

 

Close the emergency empty-

 

 

ing hose correctly (see the

 

The emergency emptying

section "Carrying out Emer-

 

hose is not correctly closed

gency Emptying"). Call your

 

or is leaking.

local Service Force Centre if

 

 

the emergency emptying

 

 

hose leaks.

Fabric softener was not

The conditioner insert in the

Clean the detergent dis-

washed in, compart-

compartment for the condi-

penser drawer and attach the

ment æ for condition-

tioners is not correctly at-

conditioner insert securely.

ers is filled with water.

tached or is blocked.

 

 

 

Pay attention to the maxi-

Washing heavily

Probably too much washing

mum load quantity (see Pro-

gramme tables). In the case

creased

put in the drum.

of easy-care fabrics, select

 

 

 

 

the EASY IRON programme.

 

Drain hose is kinked.

Remove the kink.

The washing is not suf-

 

Contact your local Service

Maximum pump head (dis-

Force Centre. For pumping

ficiently spun. Water is

charge height 1m from the

heights over 1m a conver-

left in the drum.

appliance's base) is exceeded.

sion kit is available as a spe-

The fault code E20

 

cial accessory.

appears . The RINSE

 

 

 

display flashes.

 

Switch off the appliance and

 

Drain pump is blocked.

pull out the mains plug.

 

 

Clean the drain pump.

 

 

 

34

Image 34
Contents ÖKO-LAVAMAT 74640 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washWarm pre wash before the main washing cycle Ment products are only effective at higher temperaturesProgramme option buttons Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration See Programme Tables for maximum loads Opening and closing the doorLoading the washing Close the door firmlyCompartment for pre-wash/soaking detergent If using liquid detergent / tabletsAdd detergent / conditioner Or for water softening agentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Programme Tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterAdditional Rinse RINSE+ When the water is completely drainedCancelling the additional rinse function To set the additional rinse functionWashing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainPage Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG