Electrolux EWP 126100 W, EWP 86100 W Rinse Hold, Extra Rinse, Delay Start, Select a delayed start

Page 16

16electrolux

3Spin reduction and By selecting a programme, the appliance proposes auto-

Rinse Hold

matically the maximum spin speed provided for that pro-

 

gramme.

 

Press this button repeatedly to change the spin speed, if

 

you want your laundry to be spun at a different speed.

 

The relevant light illuminates.

Rinse Hold

By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water.

To empty out the water, please read the paragraph «At the end of the programme».

4

Super Quick

By pressing this button the corresponding pilot light illu-

 

 

minates.

 

 

Short cycle for lightly soiled items or for laundry which

 

 

needs only freshening up.

 

 

With this option, a reduced load of laundry is recommen-

 

 

ded:

Cottons 3 kg

Synthetics and delicates 1,5 kg

3Extra Rinse

+

4

This appliance is designed for saving water. However, for people with very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water.

Press simultaneously the buttons 3 and 4 for some sec- onds: the pilot light 7.2 comes on. This function stays permanently on. To remove it press the same buttons again until the pilot light 7.2 goes off.

5

Delay Start

The start of the programme can be delayed by 3, 6 or 9

 

 

hours by means of this button. The relevant light illumi-

 

 

nates.

 

 

You must select this option after you have set the pro-

 

 

gramme and before you start the programme.

Select a delayed start:

select the programme and the required options;

select the delay start by pressing the button 5;

press the button 6:

the appliance starts its hourly countdown.

The programme will start after the selected delay has expired.

Cancelling the delayed start after having started the programme:

set the appliance to PAUSE by pressing the button 6;

press the button 5 once, the light relevant to the selec- ted delay goes off;

press the button 6 again to start the programme.

The DELAY START cannot be selected with the drain programme.

Image 16
Contents Washing Machine Contents Safety InformationInstallation Child SafetyThis appliance must be connected to a cold water supply USEEnvironment Concerns Frost PrecautionPackaging Materials Product Description Technical DataEcological Hints Unpacking InstallationNecessary tools Positioning and Levelling Hooked over the edge of a sink using the plastic hose guide Water InletWater Drainage Onto a sink outlet spigotDirectly to a built-in drain pipe in the room wall Special Accessories First USEConnections Overview Electrical ConnectionDaily USE Sort OUT the LaundryBall point pen and glue moisten with Before Loading the LaundryMaximum Loads Close the Door Gently Detergents and AdditivesQuantity of Detergent to be Used Degrees of Water HardnessFlap for Powder or Liquid Detergent UP- Flap position if using Powder de- tergentFlap is down and you wish to use powder detergent SET Your Washing Programme Measure OUT the Fabric Softener Close the Detergent Dispenser DrawerButton 6 starts flashing the appliance is now Delay Start Select a delayed startRinse Hold Extra RinseIndicator pilot lights Start/Pause Start the programme by pressing the buttonOpened pay attention to the water level and tem AT the END of the ProgrammeWashing Programmes Door SealSynthetic Spin Care and Cleaning Maintenance WashCleaning the Dispenser Drawer Consumption ValuesCleaning the Drain Filter Remove the filter and clean it under the tap Cleaning the Water Inlet Filters What to do IF…Malfunction Replace it with a new one Programme is still running PNC 192988041-B-362011