Centre. Always insist on genuine spare parts.
INSTALLATION
•This appliance is heavy. Care should be taken when moving it.
•All packing and transit bolts must be re- moved before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant sec- tion in the user manual.
•This appliance is free standing only. DO NOT build it in under a counter and DO NOT remove the worktop for any reason.
•After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.
•Install the appliance on a flat hard floor.
•Never place cardboard, wood or similar materials under the appliance to com- pensate for any unevenness in the floor.
•If the appliance is situated on a carpeted floor, please adjust the feet in order to al- low air to circulate freely under the appli- ance.
•Check that the appliance does not touch the wall or other kitchen units.
•This appliance must be connected to a cold water supply.
•Do not use the hose from your previous appliance to connect to water supply. Al- ways use the hose supplied with the ap- pliance.
•The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
•Always be sure, that there is no water leakage from hoses and their connec- tions after the installation.
•If the appliance is installed in a location subject to frost, please read the “Frost precaution” chapter. Manufacturer de- cline any responsibility for freezing dam- ages.
•Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
electrolux 3
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
USE
•This appliance is designed for domestic use. It must not be used for purposes other than those for which it was de- signed.
•Only wash fabrics which are designed to be machine washed. Follow the instruc- tions on each garment label.
•Do not overload the appliance. See the "Washing Programme Chart".
•Before washing, ensure that all pockets are empty and buttons and zips are fas- tened. Avoid washing frayed or torn arti- cles and treat stains such as paint, ink, rust, and grass before washing. Under- wired bras must NOT be machine wash- ed.
•The detergent dispenser drawer is provi- ded with an insert for liquid detergent. Do not use the insert downwards for gelati- nous detergents, with programmes in- cluding prewash, with the delay start op- tion. In all these cases you can use me- tering balls or sachets provided with the detergent, Take out the metering aid at the end of the washing cycle.
•Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile clean- ing fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the appli- ance.
•Never pull the power supply cable to re- move the plug from the socket; always take hold of the plug itself.
•Never use the appliance if the power supply cable, the control panel, the work- ing surface or the base are damaged so that the inside of the appliance is acces- sible.
CHILD SAFETY
•This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or in-