Electrolux LAVAMAT 84745 manual Starting the wash programme, If using liquid detergents/tablets

Page 25

Operating Instructions

3.Push the detergent dispenser drawer in fully

3 If using liquid detergents/tablets:

Add liquid detergent or tablets in the quantity recommended by the washing detergent manufacturer. Add liquid detergent with the dosage container provided by the detergent manufacturer.

Starting the wash programme

01. Check that the water tap is open.

2.Starting the wash programme:

Press the START/PAUSE button.

The wash programme is started or starts after the end of the time delay set.

3

The door is not correctly closed if, when the button START/PAUSE

 

is pressed,

– the error code Cd is shown in the multi-display and

– the indicators PRE WASH, RINSE and RINSE+ flash.

In this case, press the door firmly closed and again press the START/PAUSE button.

If a delay start has been set:

The delay time set counts down, the remaining time until the start of the programme is displayed in the multi display (in hours remaining). During this time, you can add washing or change the delay time or cancel it.

• Adding washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping the delay time: Press the DELAY TIMER button until the desired time is displayed; when the duration of the pro- gramme is displayed (e.g. 120 minutes) the wash programme starts immediately.

25

Image 25
Contents ÖKO-LAVAMAT 84745 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control PanelRinse water it is not spun To drain the water after a rinse hold without spinningWash programme for Delicates at 30 C or 40 C Wool / P HandwashPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsWash Time Display Consumption Values and Programme TimesRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Possible options to suit the type of washing Setting the wash programmeJusted to suit the washing programme Changing Spin Speed /selecting Rinse HoldWool / PHandwash SILK/ PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerLoading the washing Opening and Closing the Filling DoorFor maximum loads, see Programme Tables Close the door firmlyDetergents and conditioners Adding detergent/conditionersFor use with the Stain programme option only Compartment for main wash detergentIf a delay start has been set If using liquid detergents/tabletsStarting the wash programme Push the detergent dispenser drawer in fullyProgramme progress display Washing Programme ProgressMulti display Changing spin speedOnce the wash programme has come to an end Washing cycle complete/Removing the washingIf Rinse Hold was selected Wash If the Easy Iron programme was selectedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingBelow Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingWhen the water is completely drained Additional rinse cycle RINSE+ To cancel the additional rinseHelpful to rinse with extra water To set the additional rinseWater cooling To cancel water coolingAdditional rinse cycle and water cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Setting the child safety feature Child Safety FeatureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Water connectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataDimensions in mm Great Britain Warranty conditionsPage Page Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG