Electrolux LAVAMAT 84745 manual Inlet Hose Connection

Page 55

Installation and connection instructions

Inlet Hose Connection

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by your local Serv- ice Force Centre is permissible.

–Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua Control.

–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua Control.

Important! Never cut hoses into pieces in order to extend them!

3	Sealing rings are supplied either in the plastic
	nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled

connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards. Instead, turn it to the right or left as shown in the diagram.

– Tighten firmly to prevent leakage but do not use excessive force.

2. Connect the hose with a straight connection to a water tap with a screw thread R 3/4 (inches). Important! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing machine into operation it is possible to check that the connection is free of leaks.

55

Image 55

Contents ÖKO-LAVAMAT 84745 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control PanelWool / P Handwash To drain the water after a rinse hold without spinningRinse water it is not spun Wash programme for Delicates at 30 C or 40 CPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsWash Time Display Consumption Values and Programme TimesRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Possible options to suit the type of washing Setting the wash programmeSILK/ PHandwash Changing Spin Speed /selecting Rinse HoldJusted to suit the washing programme Wool / PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerClose the door firmly Opening and Closing the Filling DoorLoading the washing For maximum loads, see Programme TablesCompartment for main wash detergent Adding detergent/conditionersDetergents and conditioners For use with the Stain programme option onlyPush the detergent dispenser drawer in fully If using liquid detergents/tabletsIf a delay start has been set Starting the wash programmeChanging spin speed Washing Programme ProgressProgramme progress display Multi displayOnce the wash programme has come to an end Washing cycle complete/Removing the washingIf Rinse Hold was selected Wash If the Easy Iron programme was selectedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingBelow Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingWhen the water is completely drained To set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Setting the child safety feature Child Safety FeatureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataDimensions in mm Great Britain Warranty conditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG