Electrolux LAVAMAT 84745 manual What to do if, Trouble Shooting, Below

Page 34

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code C1, C2 or Cd is shown in the multi-display, you may be able to rem- edy the fault yourself (see the Fault table

below).

After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

Problem

Possible cause

Remedy

 

The mains plug is not

Plug in the mains plug.

 

plugged in.

 

 

 

The house fuse has blown.

Replace the fuse.

Washing machine does

Door is not properly closed.

Close door; Lock must en-

not work.

gage audibly .

 

 

 

START/PAUSE button has not

Keep the START/PAUSE but-

 

ton pressed until the pro-

 

been pressed long enough.

gramme starts.

 

 

 

Child safety feature is

Cancel child safety feature

Door cannot be closed.

(see section „Child safety

switched On.

 

feature“).

 

 

Error code Cd is shown

 

 

in the multi-display.

The filling door is not

Close the filling door cor-

The indicators

correctly closed.

rectly. Restart the program.

PRE WASH, RINSE and

 

 

RINSE+ flash.

 

 

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents ÖKO-LAVAMAT 84745 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control Panel Programme selectorWash programme for Delicates at 30 C or 40 C To drain the water after a rinse hold without spinningRinse water it is not spun Wool / P HandwashProgramme Option Buttons PRE Wash Pre-wash/SoakingProgrammable functions Time SaverWash Time Display Consumption Values and Programme TimesRation, in minutes, of the programme What does Update mean? Anti-flood Aqua Control + Aqua AlarmPreparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Setting the wash programme Possible options to suit the type of washingWool / PHandwash Changing Spin Speed /selecting Rinse HoldJusted to suit the washing programme SILK/ PHandwashSetting the delay timer/soaking duration Delay timer Soaking durationFor maximum loads, see Programme Tables Opening and Closing the Filling DoorLoading the washing Close the door firmlyFor use with the Stain programme option only Adding detergent/conditionersDetergents and conditioners Compartment for main wash detergentStarting the wash programme If using liquid detergents/tabletsIf a delay start has been set Push the detergent dispenser drawer in fullyMulti display Washing Programme ProgressProgramme progress display Changing spin speedOnce the wash programme has come to an end Washing cycle complete/Removing the washingIf Rinse Hold was selected If the Easy Iron programme was selected WashProgramme Tables WashingSeparate Rinse/Conditioning/Starching/Treating Separate SpinningMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpWhat to do if Trouble ShootingBelow Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Helpful to rinse with extra water To cancel the additional rinseAdditional rinse cycle RINSE+ To set the additional rinseAdditional rinse cycle and water cooling To cancel water coolingWater cooling To set the water cooling functionVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Setting the child safety feature Child Safety FeatureCancelling the child safety Feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Water connectionPermanent Connection UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataDimensions in mm Warranty conditions Great BritainPage Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents