Operating Instructions
Problem | Possible cause | Remedy | |
| The screw Connection on the | Tighten the inlet hose screw | |
| inlet hose is leaking. | connection. | |
| Drainage hose is leaking. | Check the drain hose and re- | |
| place it if necessary. | ||
|
| ||
| The drain pump cover is not | Close cover correctly. | |
| correctly close. | ||
|
| ||
Water leaks out of the | Washing is caught in the | Stop the programme, remove | |
washing machine. | the washing caught in the | ||
door. | |||
| door. Restart the programme. | ||
|
| ||
|
| Close the emergency empty- | |
| The emergency emptying | ing hose (see section „Carry | |
| out emergency emptying“). | ||
| hose is not correctly closed | ||
| Call your local Service Force | ||
| or is leaking. | ||
| Centre if the emergency | ||
|
| ||
|
| emptying hose is leaking. | |
|
|
| |
The drain pump runs |
| Close the water tap, remove | |
constantly - even when | The Aqua Control | the mains plug and inform | |
the appliance is | system has been activated. | your local Service Force Cen- | |
switched off. |
| tre. | |
Fabric softener was not | The insert in the comparti- | Clean the detergent dis- | |
rinsed in, compart- | ment for conditioners is not | ||
penser drawer and attach the | |||
ment æ for condition- | correctly attached or is | ||
conditioner insert correctly. | |||
ers is filled with water. | blokked. | ||
| |||
|
| Pay attention to the maxi- | |
Washing is heavily | Probably too much washing | mum load quantity (see pro- | |
gramme tables). In the case | |||
creased. | has been put in drum. | ||
of | |||
|
| ||
|
| the EASY IRON programme. | |
The washing has not | The washing was not able to | Always load the drum as ful | |
been spun as dry as | be distributed evenly in the | as possible with a combina- | |
usual. | drum prior to spinning. | tion of large and small items. | |
|
|
|
36