Electrolux LAVAMAT 84745 manual Installation and connection instructions

Page 47

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

•When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

•Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

•Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

•Always insert the plug into a correctly installed earthed socket.

•Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

•Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

•Any electrical work required to install this appliance should be carried out by an electrician or competent person.

47

Image 47

Contents ÖKO-LAVAMAT 84745 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control PanelWool / P Handwash To drain the water after a rinse hold without spinningRinse water it is not spun Wash programme for Delicates at 30 C or 40 CPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsRation, in minutes, of the programme Consumption Values and Programme TimesWash Time Display Anti-flood Aqua Control + Aqua Alarm What does Update mean?Sorting and preparing the washing Before the first washPreparing for a wash cycle Types of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Possible options to suit the type of washing Setting the wash programmeSILK/ PHandwash Changing Spin Speed /selecting Rinse HoldJusted to suit the washing programme Wool / PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerClose the door firmly Opening and Closing the Filling DoorLoading the washing For maximum loads, see Programme TablesCompartment for main wash detergent Adding detergent/conditionersDetergents and conditioners For use with the Stain programme option onlyPush the detergent dispenser drawer in fully If using liquid detergents/tabletsIf a delay start has been set Starting the wash programmeChanging spin speed Washing Programme ProgressProgramme progress display Multi displayIf Rinse Hold was selected Washing cycle complete/Removing the washingOnce the wash programme has come to an end Wash If the Easy Iron programme was selectedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpBelow Trouble ShootingWhat to do if Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingWhen the water is completely drained To set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingTo set Variomatic Spin To cancel Variomatic SpinVariomatic spin Programme Protection Setting the Programme ProtectionCancelling the Programme Protection Cancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Great Britain Warranty conditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG