Electrolux LAVAMAT 84745 manual Setting the Programme Protection

Page 45

Operating Instructions

Programme Protection

	To protect a programme setting against unintentional changes or tam-
	pering (for example, programme selector turned or buttons pressed ac-
	cidentally, etc.), set the Programme Protection. This will protect your
	washing from damage.
3	The Programme Protection can be set or released at any time while the
	programme is running.

Setting the Programme Protection:

01. Set the desired programme.

2.Press the START/PAUSE button to start the programme.

3.Press and hold the PRE WASH and SENSITIVE buttons at the same time, for around 5 seconds. The programme progress display flashes for

5 seconds; the Programme Protection is now set.

3	No other settings can be selected as long as the Programme Protection
	is active. The door cannot be opened. Also, when the wash cycle is com-
	pleted, the Programme Protection must be released before the door can
	be opened.
	If one of the buttons is pressed to try to change the setting while the
	wash programme is running, the programme progress display flashes
	for 5 seconds.
	If the programme selector is turned to try to change the setting, the
	programme progress display flashes until the programme selector is re-
	turned to its original setting. This does not affect the wash cycle.
3	The programme selector must be at the original position before the
	Programme Protection can be cancelled.

Cancelling the Programme Protection:

0Press and hold the PRE WASH and SENSITIVE buttons at the same time, for around 5 seconds. The programme progress display flashes for

5 seconds, then remains lit steadily for 5 seconds. The Programme Pro- tection is now released.

45

Image 45

Contents ÖKO-LAVAMAT 84745 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control PanelRinse water it is not spun To drain the water after a rinse hold without spinningWash programme for Delicates at 30 C or 40 C Wool / P HandwashPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsConsumption Values and Programme Times Wash Time DisplayRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Before the first wash Preparing for a wash cycleSorting and preparing the washing Types of washing and care symbols Quantities of detergent and conditioners? Water softeningWater hardness details Running a washing cycle Brief instructionsAfter the washing programme has ended Possible options to suit the type of washing Setting the wash programmeJusted to suit the washing programme Changing Spin Speed /selecting Rinse HoldWool / PHandwash SILK/ PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerLoading the washing Opening and Closing the Filling DoorFor maximum loads, see Programme Tables Close the door firmlyDetergents and conditioners Adding detergent/conditionersFor use with the Stain programme option only Compartment for main wash detergentIf a delay start has been set If using liquid detergents/tabletsStarting the wash programme Push the detergent dispenser drawer in fullyProgramme progress display Washing Programme ProgressMulti display Changing spin speedWashing cycle complete/Removing the washing Once the wash programme has come to an endIf Rinse Hold was selected Wash If the Easy Iron programme was selectedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpTrouble Shooting What to do ifBelow Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingWhen the water is completely drained Additional rinse cycle RINSE+ To cancel the additional rinseHelpful to rinse with extra water To set the additional rinseWater cooling To cancel water coolingAdditional rinse cycle and water cooling To set the water cooling functionTo cancel Variomatic Spin Variomatic spinTo set Variomatic Spin Setting the Programme Protection Cancelling the Programme ProtectionProgramme Protection Child Safety Feature Setting the child safety featureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Water connectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Technical Data DimensionsDimensions in mm Great Britain Warranty conditionsPage Page Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG