Electrolux LAVAMAT 84745 Washing Programme Progress, Programme progress display, Multi display

Page 26

Operating Instructions

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the Programme progress display. During the washing programme the current programme step is displayed.

	Multi display
	The expected time remaining (in minutes)
	up to the end of the programme is shown


	in the Multi display.
3	The multi display indicates the estimated duration, in minutes, of the
	programme. These timings are estimates and can vary according to in-
	coming water temperature, type and quantity of laundry, out of bal-
	ance spin detection and foam detection. During the programme
	countdown, the remaining time can be recalculated due to any of the
	above factors.

Changing spin speed

During the washing programme, the spin speed can still be changed or RINSE HOLD can be set.

Other settings cannot be changed.

Stopping the programme

0Turn the progamme selector to OFF in order to stop the washing prematurely.

3	The programme can be interrupted at any time with the START/PAUSE
	button and can be continued again by pressing this button again.

26

Image 26

Contents ÖKO-LAVAMAT 84745 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Control Panel Programme selectorWash programme for Delicates at 30 C or 40 C To drain the water after a rinse hold without spinningRinse water it is not spun Wool / P HandwashProgramme Option Buttons PRE Wash Pre-wash/SoakingProgrammable functions Time SaverRation, in minutes, of the programme Consumption Values and Programme TimesWash Time Display What does Update mean? Anti-flood Aqua Control + Aqua AlarmSorting and preparing the washing Before the first washPreparing for a wash cycle Types of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Setting the wash programme Possible options to suit the type of washingWool / PHandwash Changing Spin Speed /selecting Rinse HoldJusted to suit the washing programme SILK/ PHandwashSetting the delay timer/soaking duration Delay timer Soaking durationFor maximum loads, see Programme Tables Opening and Closing the Filling DoorLoading the washing Close the door firmlyFor use with the Stain programme option only Adding detergent/conditionersDetergents and conditioners Compartment for main wash detergentStarting the wash programme If using liquid detergents/tabletsIf a delay start has been set Push the detergent dispenser drawer in fullyMulti display Washing Programme ProgressProgramme progress display Changing spin speedIf Rinse Hold was selected Washing cycle complete/Removing the washingOnce the wash programme has come to an end If the Easy Iron programme was selected WashProgramme Tables WashingSeparate Rinse/Conditioning/Starching/Treating Separate SpinningMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpBelow Trouble ShootingWhat to do if Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Helpful to rinse with extra water To cancel the additional rinseAdditional rinse cycle RINSE+ To set the additional rinseAdditional rinse cycle and water cooling To cancel water coolingWater cooling To set the water cooling functionTo set Variomatic Spin To cancel Variomatic SpinVariomatic spin Programme Protection Setting the Programme ProtectionCancelling the Programme Protection Cancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Terference Water connectionPermanent Connection UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Warranty conditions Great BritainPage Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG