Electrolux LAVAMAT 84745 manual Been removed Connection instructions

Page 35

 

 

 

Operating Instructions

 

 

 

 

 

 

Problem

Possible cause

Remedy

 

 

 

Water tap is closed.

Open water tap.

 

 

Water is not entering.

Filter in the socket of the in-

Close water tap. Disconnect

 

 

hose from water tap, remove

 

 

Error code (1 ap-

let hose connection is

filter and clean under

 

 

blocked.

 

 

pears.

running water.

 

 

 

 

 

 

Water tap is blocked with

Check the water tap and

 

 

 

limescale or is faulty.

have it reaired if necessary.

 

 

 

Transport packaging has not

Remove transport packaging

 

 

 

according to setting up and

 

 

 

been removed.

 

 

 

connection instructions.

 

 

 

 

 

 

 

 

Adjust the feet according to

 

 

 

The machine is not level.

installation and connection

 

 

 

 

instructions.

 

 

Washing machine vi-

There is very little washing in

This does not affect the op-

 

 

brates during operation

 

 

the drum (e.g. only a dressing

 

 

or is unstable.

gown).

eration of the machine.

 

 

 

 

 

 

 

Water could not be fully

Check the drain hose and re-

 

 

 

move any kink if necessary,

 

 

 

pumped out before spinning

 

 

 

or clean the drain pump and,

 

 

 

because the drain hose is

 

 

 

if necessary, remove foreign

 

 

 

kinked or water pump is

 

 

 

bodies from the pump hous-

 

 

 

blocked.

 

 

 

ing.

 

 

 

 

 

 

 

 

If may be necessary to re-

 

 

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

 

 

gent used. Follow the

 

 

ing the main wash.

has been used.

detergent manufacturer’s

 

 

 

 

 

 

 

 

recommendations.

 

 

 

 

 

 

 

 

 

 

 

35

Image 35
Contents ÖKO-LAVAMAT 84745 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control PanelWool / P Handwash To drain the water after a rinse hold without spinningRinse water it is not spun Wash programme for Delicates at 30 C or 40 CPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsRation, in minutes, of the programme Consumption Values and Programme TimesWash Time Display Anti-flood Aqua Control + Aqua Alarm What does Update mean?Sorting and preparing the washing Before the first washPreparing for a wash cycle Types of washing and care symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Possible options to suit the type of washing Setting the wash programmeSILK/ PHandwash Changing Spin Speed /selecting Rinse HoldJusted to suit the washing programme Wool / PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerClose the door firmly Opening and Closing the Filling DoorLoading the washing For maximum loads, see Programme TablesCompartment for main wash detergent Adding detergent/conditionersDetergents and conditioners For use with the Stain programme option onlyPush the detergent dispenser drawer in fully If using liquid detergents/tabletsIf a delay start has been set Starting the wash programmeChanging spin speed Washing Programme ProgressProgramme progress display Multi displayIf Rinse Hold was selected Washing cycle complete/Removing the washingOnce the wash programme has come to an end Wash If the Easy Iron programme was selectedWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpBelow Trouble ShootingWhat to do if Been removed Connection instructions Inlet hose is leaking Connection Drainage hose is leaking Emptying height 1m from Water tap is not fully Open water tap fully Opened If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingWhen the water is completely drained To set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingTo set Variomatic Spin To cancel Variomatic SpinVariomatic spin Programme Protection Setting the Programme ProtectionCancelling the Programme Protection Cancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Great Britain Warranty conditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG