Connecting other video components, TV connection

Getting started

Connecting other video components

Turn off all components before making connections.

•Illustrations of the input/output terminals are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among different components.

Notes for video connection:

•You can use composite video cord or S-video cord for connecting the VCR to this receiver.

•You can use component video cord in addition to composite video cord and S-video cord for connecting your DVD player, TV and DBS tuner to this receiver.

•By using S-video cord or component video cord, you can get a better picture quality—in the order: composite < S-video < component.

•To view the picture from the DVD player, DBS tuner or VCR on your TV, connect your TV to this receiver using the same type of cord for connecting the DVD player, DBS tuner or VCR to this receiver.

TV connection

DO NOT use a TV through a VCR or a TV with a built-in VCR; Otherwise, the picture may be distorted.

FM 75

COAXIAL

COMULINK-III

Connect using one of the video terminals.			Component video cord (not supplied)
			Green	Green
DVD IN	DBS IN	MONITOR	Blue	Blue
		VIDEO

Y	DVD	DBS	OUT	VCR	IN
	IN	IN	OUT		IN		Red	Red
	IN	IN	(REC)		(PLAY)	VIDEO	Red	Red

MONITOR OUT

Composite video cord (not supplied)

	PR
COMPONENT VIDEO	S-VIDEO
COMPONENT VIDEO

S-video cord (not supplied)

AM LOOP

DVD

FRONT

DVD IN DBS IN MONITOR OUT

DIGITAL 3

DIGITAL 1

CENTER

SURROUND

FRONT

ANTENNA

VIDEO

(TV)

(DVD)

SPEAKER

SPEAKERS

AM EXT

AUDIO

SUB-

DVD

DBS

OUT

VCR IN

RIGHT LEFT

WOOFER

CENTER

(REC)

(PLAY)

VIDEO

DIGITAL IN

DIGITAL 2 (DBS)

MONITOR OUT

CAUTION:

SPEAKER

SUBWOOFER

IMPEDANCE

DBS

VCR IN

SURR (REAR)

OUT

8 ~ 16

OUT

COMPONENT VIDEO

S-VIDEO

(REC)

(PLAY)

RIGHT

LEFT

RX-ES1SL

AUDIO

Stereo audio cord (not supplied)

LEFT

RIGHT

DBS	OUT VCR	IN	TV
IN	(REC)	(PLAY)	IN

OUT

AUDIO

About VIDEO SIGNAL SELECTOR on XV-NK58SL

Selecting the 525i/525p/REMOTE selector position

VIDEO SIGNAL

SELECTOR

NTSC REMOTE 525p

PAL

525i

Selecting PAL or NTSC

Set the PAL/NTSC selector on the rear panel to “PAL” or “NTSC” to match the color system of your TV. Make sure that the color system of a DVD VIDEO/SVCD/video CD disc labeled on the package matches your TV.

If you use a multi-color system TV, you can play discs recorded on both PAL and NTSC systems by setting the PAL/NTSC selector appropriately.

•Change the PAL/NTSC selector position in stop mode or with no disc inserted. The changed setting is not effective if you change the selector position in playback mode.

You must change the 525i/525p/REMOTE selector position while the player power is off. Otherwise, the changed setting is not effective.

•If your television equipped with component jacks does not support the progressive scanning mode, set the selector to “525i.”

•If your television equipped with component jacks supports the progressive scanning mode, set the selector to “525p.”

•If you want to select the scanning mode between the interlace and progressive modes (depending on the source condition, or when connecting more than one television, etc.), set the selector to “REMOTE.”

CONTINUED ON THE NEXT PAGE

Getting started