JVC LVT1002-012B manual Audio menu, Others menu

Page 62

Changing the initial settings

MP3&WMA/JPEG

The player can play MP3/WMA and JPEG files recorded on a CD-R/CD-RW disc. However, if a disc contains both MP3/WMA and JPEG files, you can only play files of the type selected in this menu item.

Setting options

MP3&WMA, JPEG

[MP3&WMA]: when selected, only MP3/WMA files can be played back.

[JPEG]: when selected, only JPEG files can be played back.

AUDIO menu

DIGITAL AUDIO OUTPUT

To connect the player’s digital output to an external device equipped with a digital input, this item must be set correctly. See “Appendix C: Digital output signal chart” on page 63 for details about the relation between the setting and output signals.

Setting options

PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM

[PCM ONLY]: select when you connect the DIGITAL OUT jack of the player to the linear PCM digital input of other audio equipment.

[DOLBY DIGITAL/PCM]: select when you connect the digital input of a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.

When this option is selected, playing back a disc recorded by the MPEG Multichannel format outputs a linear PCM digital signal.

[STREAM/PCM]: select when you connect the digital input of an amplifier with a built-in DTS, MPEG Multichannel or Dolby Digital decoder, or the stand-alone unit of such a decoder.

With some DVD VIDEO discs that are not fully copy-protected, a 20 or 24 bit digital signal may be output.

A signal recorded with the 96 kHz or higher sampling frequency is output from the DIGITAL OUT jack with the 48 kHz sampling frequency.

When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.

ANALOG DOWN MIX

To correctly play the audio on a DVD VIDEO disc recorded with surround multichannel audio, you must set this item properly according to your audio system configuration.

(This function does not work when the 3D PHONIC function is activated.)

Setting options

DOLBY SURROUND, STEREO

[DOLBY SURROUND]: select when listening to multichannel surround audio with the player’s analog AUDIO OUT terminals connected to a surround decoder.

[STEREO]: select when listening to conventional two-channel stereo audio with the player’s AUDIO OUT terminals connected to a stereo amplifier/receiver or television set, or in case you want to record the audio from a DVD VIDEO disc to MiniDisc, cassette, etc.

D. RANGE CONTROL

This setting provides optimal audio quality from the analog AUDIO OUT terminals for listening to DVD VIDEO discs recorded in Dolby Digital format, at low or middle volume.

Setting options

WIDE RANGE, NORMAL, TV MODE

[WIDE RANGE]: when selected, audio is played back with the widest dynamic range so that you can enjoy powerful playback sound.

[NORMAL]: normally, select this option.

[TV MODE]: select if DVD VIDEO disc sound level is lower than

TV program sound level. Thus you can hear sound at a lower volume clearly.

OUTPUT LEVEL

This setting allows you to attenuate the level of the signal output from the player’s analog AUDIO OUT terminals.

Setting options

STANDARD, LOW

If the sound output from the speaker is distorted, select [LOW].

OTHERS menu

RESUME

You can select the resume playback mode.

See pages 36 and 37 for details about the resume playback function.

Setting options

ON, OFF, DISC RESUME

[ON]: when selected, the player can resume playback of the disc from the position where playback was last interrupted, if the disc is still in the disc tray.

[OFF]: when selected, the resume function is deactivated.

[DISC RESUME]: when selected, the player can resume playback of the last 30 discs played. The player retains a memory of the interrupted positions of the last 30 discs played, even though they have been removed from the disc tray.

ON SCREEN GUIDE

The player can display “on-screen guide” icons or characters on the picture, which show what is happening to the disc or the player.

Example of “on-screen guide” icons: , ,

Setting options

ON, OFF

[ON]: when selected, the on-screen guide is activated.

AUTO STANDBY

When the player is stopped for more than 30 minutes or 60 minutes, the player enters standby mode automatically.

Setting options

60, 30, OFF

AV COMPULINK MODE

You must set this item correctly to use the AV COMPU LINK system.

Setting options

DVD1, DVD2, DVD3

See page 65 for details about the AV COMPU LINK function.

59

Image 62
Contents RX-ES1SL XV-NK58SL Important for Laser Products Do not stack RX-ES1SL and XV-NK58SL RX-ES1SLXV-NK58SL Table of Contents Remote control Parts identificationDisplay window Parts identificationFront panel Rear panelFront panel VIDEO, S-VIDEO, Component Video Signal Selector 9 NTSC, PALRear panel COAXIAL, OpticalSetting the voltage selector RX-ES1SL PrecautionsPutting batteries in the remote control Checking the supplied accessoriesFM antenna connection Connecting the FM and AM antennasGetting started Connecting the subwoofer Connecting the speakers and DVD playerSpeaker Layout Diagram Connecting the front, center, and surround speakersConnecting the DVD player XV-NK58SL Supplied 1 cableConnecting other video components TV connectionVCR connection Picture SourceDBS tuner connection Analog connection for DVD Multi playback seeConnecting the power cord Digital connectionSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Selecting the digital decode modeAdjust the volume Headphone modeSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory Turning off the sounds temporarily- MutingSetting UP flashes on the display Speaker settingsFrom the remote control only Before you start, rememberSpeaker settings Your setting is stored When selecting Medium RoomWhen selecting Large Room Register the sizes of all the connected speakersSetting the speaker delay time Crossover frequency is not valid for the Headphone modeSetting the digital input Digital Basic settingsOperating procedure Terminals-DIGITALBasic settings Setting Auto Surround-AUTO SRSetting the video component input mode-DVD VIDEO/DBS Video Adjusting the tone-BASS, Treble Sound adjustmentsAdjusting the subwoofer output level Press AdjustSound adjustments Adjusting the front speakers output balance-BALAttenuating the input signal-ATT When using the remote control Press Bass BoostFrom the remote control only Press FM/AM to select the band Tuning in to stations manuallyUsing preset tuning Tuner operationsTuner operations Selecting the FM reception modeTo tune in a preset station Introducing the Surround/DSP modes Creating realistic sound fieldsReproducing theater ambience Surround modesDAP Digital Acoustic Processor modes DSP Digital Signal Processor modesCreating realistic sound fields All Channel StereoFrom the remote control Using Surround modesPress Surround to select an appropriate Surround mode Select and play software you likePress Test again to stop the test tone Turn Multi JOG to select an appropriate Surround modePress Test to check the speakers output balance Press SurroundFrom the remote control Using DSP modesRepeat steps 5 and 6 to adjust the other settings To cancel Surround modeEffect available only for DAP modes *2 To adjust the DAP effect levelTo cancel DSP Modes Activating the DVD Multi playback mode Using the DVD Multi playback modeAdjusting the speaker output level From the remote control Press DVD MultiAbout discs Before operationAbout this manual Press Enter Initial setupTurning on/off the player Press 5/∞ to select the desired languageAbout PBC Playback Control Basic playbackIf a menu is shown on the TV screen Resuming playback To advance or reverse playback rapidly while monitoring Various speed playbackTo resume playback X1.5 Quick Playback with soundTo play back in slow motion Using the numeric buttonsLocating the beginning of a scene or song To replay the previous scenes One touch replay functionLocating a desired scene from the DVD menu Advanced operationsPlaying from a specific position Specifying a desired titleAdvanced operations Changing the playback orderTo play back in a specific order Program play To dismiss the menu barTo play back in random order Random play To stop repeat playback Repeat playbackTo repeat a desired part A-B repeat playback To quit repeat playbackTo select a scene angle of DVD Video Angle Changing the language, sound and scene angleTo change the audio language or sound Audio To zoom in pictures To adjust the picture character VFPSpecial picture/sound effect To return to the normal playbackTo simulate surround sound 3D Phonic Basic operation procedureMenu bar functions To bring up the menu barMenu bar functions for SVCD/Video CD/ Audio CD Time mode selectionMenu bar functions for DVD Video CHAP. Chapter searchAbout MP3/WMA discs MP3/WMA disc playbackOperations Basic operationsMP3/WMA disc playback Repeat playbackDirect selection Basic operations Jpeg disc playbackAbout Jpeg discs To see a desired pictureTo start the slide show Viewing pictures continuously slide show modeTo zoom in the picture To select the start point of the slide showWhile the Jpeg Control display is shown, press Repeat Press Repeat mode remains activeRepeat function Press 3 to start repeat playbackReserving songs Karaoke operationPreparation Karaoke operation Selecting audioSelecting audio track Audio Karaoke Selecting Karaoke sound KaraokeExample for SVCD, Video CD or Audio CD with +R Stereo audio Left channel only Right channel onlyAdding various effects to the vocal Vocal Using the Effect buttonAdding an effect to your voice Adding an echo effect EchoShifting the musical key Using the KEY 9/KEY buttonsAdjustable range is from -4 to +4 Press KEY 9 or KEYSelecting preferences Changing the initial settingsHow to set preferences About the Preference displayPicture menu Changing the initial settingsLanguage menu Audio menu Others menuBring up the Others menu Limiting playback by childrenTo set Parental Lock for the first time Press 5/∞ to move To select Parental Lock then press EnterPress 5/∞ to move To select Parental Lock and press Enter To change the settingsTo temporarily release the Parental Lock Press 5/∞ to move to Temporary RELEASE, then press EnterAppendix a Country/Area code list for Parental Lock Additional informationAdditional information Appendix C Digital output signal chartAppendix B Table of languages and their abbreviations Output Disc typeAppendix D Glossary Connections 2 Video Cable Connection AV Compu Link remote control systemConnections 1 AV Compu Link Connection Monaural mini-plugsAutomatic power On/Off AV Compu Link remote control systemAutomatic selection of TV’s input mode One-touch video playOperating other JVC products DVD playerManufacturer Codes Operating other manufacturers’ equipmentTry to operate your DBS tuner by pressing DBS DBSOperating other manufacturers’ equipment Changing the transmittable signals for operating aChanging the transmittable signals for operating a Try to operate your VCR by pressing VCRGeneral TroubleshootingProblem Possible Cause Solution FM/AM TroubleshootingSurround/DSP Standard Video ActiveAudio Jpeg KaraokeVideo SpecificationsAudio DVD, DVD MULTI, DBS, VCR, TVSpecifications 220V 230 240V  2003 Victor Company of JAPAN, Limited 0603NHMMDWJEIN