JVC LVT1002-012B manual Menu bar functions, To simulate surround sound 3D Phonic

Page 48

Advanced operations

To dismiss the VFP mode selection window

Press VFP.

NOTES

The window for VFP mode selection and parameter setting disappear if no operation is made for about 10 seconds.

When the KARAOKE function is turned on, the VFP function cannot be activated even if the mode selector on the remote control unit is set to “DVD.”

To simulate surround sound (3D PHONIC)

Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system.

1 During playback, press 3D.

The 3D PHONIC window appears on the TV screen.

2 Press 2/3 to select the desired mode.

Each time you press the button, the 3D PHONIC mode changes as follows:

ACTIONDRAMA THEATERNONE

ACTION+45

Selected effect mode

ACTION

Suitable for action movies and sports programs in which the sound source moves.

DRAMA

Natural and warm sound. You can enjoy movies in a relaxed mood.

THEATER

You can enjoy sound effects like in a theater.

3 Press 5/to adjust the effect level.

You can set the effect level from [1] to [5].

The higher value enhances the effect.

To dismiss the 3D PHONIC window

Press 3D.

NOTES

The 3D PHONIC window disappears if no operation is made for about 10 seconds.

The 3D PHONIC function works correctly only when playing back a DVD VIDEO disc recorded with Dolby Digital.

When playing back a DVD VIDEO disc recorded with Dolby Digital that does not contain the rear signal, you can change the 3D PHONIC setting, but you will not be able to achieve a correct 3D effect.

The 3D PHONIC function does not affect the Dolby Digital bitstream signal from the DIGITAL OUT jack.

When the 3D PHONIC function is active, the [ANALOG DOWN MIX] setting in the [AUDIO] setting display is not available.

When the KARAOKE function is turned on, the 3D PHONIC function is deactivated.

Menu bar functions

To bring up the menu bar

1 When a disc is inserted, press ON SCREEN.

A status bar for the type of disc inserted will appear on the TV screen.

See page 36 for details about the status bar.

2 Press ON SCREEN again.

A menu bar for the type of disc inserted will appear under the status bar.

(for DVD VIDEO)

8.5Mbps

 

TITLE 33

CHAP 33

TOTAL 1:25:58

O F F

CHAP.

1/3

1/5

1/3

(for SVCD)

 

 

TRACK 33

TIME 25:58

O F F

PROG. RND.

ST1

-/4

(for Video CD)

TRACK 33 TIME 25:58

OFF

PROG.

RND.

ST

(for Audio CD)

TRACK 33 TIME 25:58

OFF

PROG. RND.

To dismiss the menu bar and status bar

Press ON SCREEN.

Basic operation procedure

1 Press 2/3 to select the icon you want to work with.

The selected icon is pointed by .

2 Press ENTER.

With many icons, an appropriate pull-down window appears, however, there are some exceptions.

NOTES

A mark or text on the menu icon for the function or mode currently selected is shown in green.

Some functions are not available during playback. (You cannot move to the associated icon when it is not available.)

45

Image 48
Contents RX-ES1SL XV-NK58SL Important for Laser Products RX-ES1SL XV-NK58SLDo not stack RX-ES1SL and XV-NK58SL Table of Contents Remote control Parts identificationParts identification Front panelDisplay window Rear panelVIDEO, S-VIDEO, Component Video Signal Selector 9 NTSC, PAL Rear panelFront panel COAXIAL, OpticalPrecautions Putting batteries in the remote controlSetting the voltage selector RX-ES1SL Checking the supplied accessoriesConnecting the FM and AM antennas Getting startedFM antenna connection Connecting the speakers and DVD player Speaker Layout DiagramConnecting the subwoofer Connecting the front, center, and surround speakersConnecting the DVD player XV-NK58SL Supplied 1 cableConnecting other video components TV connectionVCR connection Picture SourceDBS tuner connection Analog connection for DVD Multi playback seeConnecting the power cord Digital connectionTurn on the power To turn off the power into standbySelecting the analog or digital input mode Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Headphone modeTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Turning off the sounds temporarily- MutingSpeaker settings From the remote control onlySetting UP flashes on the display Before you start, rememberSpeaker settings When selecting Medium Room When selecting Large RoomYour setting is stored Register the sizes of all the connected speakersSetting the speaker delay time Crossover frequency is not valid for the Headphone modeBasic settings Operating procedureSetting the digital input Digital Terminals-DIGITALSetting Auto Surround-AUTO SR Setting the video component input mode-DVD VIDEO/DBS VideoBasic settings Sound adjustments Adjusting the subwoofer output levelAdjusting the tone-BASS, Treble Press AdjustAdjusting the front speakers output balance-BAL Attenuating the input signal-ATTSound adjustments When using the remote control Press Bass BoostTuning in to stations manually Using preset tuningFrom the remote control only Press FM/AM to select the band Tuner operationsSelecting the FM reception mode To tune in a preset stationTuner operations Creating realistic sound fields Reproducing theater ambienceIntroducing the Surround/DSP modes Surround modesDSP Digital Signal Processor modes Creating realistic sound fieldsDAP Digital Acoustic Processor modes All Channel StereoUsing Surround modes Press Surround to select an appropriate Surround modeFrom the remote control Select and play software you likeTurn Multi JOG to select an appropriate Surround mode Press Test to check the speakers output balancePress Test again to stop the test tone Press SurroundUsing DSP modes Repeat steps 5 and 6 to adjust the other settingsFrom the remote control To cancel Surround modeTo adjust the DAP effect level To cancel DSP ModesEffect available only for DAP modes *2 Using the DVD Multi playback mode Adjusting the speaker output levelActivating the DVD Multi playback mode From the remote control Press DVD MultiBefore operation About this manualAbout discs Initial setup Turning on/off the playerPress Enter Press 5/∞ to select the desired languageBasic playback If a menu is shown on the TV screenAbout PBC Playback Control Resuming playback Various speed playback To resume playbackTo advance or reverse playback rapidly while monitoring X1.5 Quick Playback with soundUsing the numeric buttons Locating the beginning of a scene or songTo play back in slow motion To replay the previous scenes One touch replay functionAdvanced operations Playing from a specific positionLocating a desired scene from the DVD menu Specifying a desired titleChanging the playback order To play back in a specific order Program playAdvanced operations To dismiss the menu barTo play back in random order Random play Repeat playback To repeat a desired part A-B repeat playbackTo stop repeat playback To quit repeat playbackChanging the language, sound and scene angle To change the audio language or sound AudioTo select a scene angle of DVD Video Angle To adjust the picture character VFP Special picture/sound effectTo zoom in pictures To return to the normal playbackBasic operation procedure Menu bar functionsTo simulate surround sound 3D Phonic To bring up the menu barTime mode selection Menu bar functions for DVD VideoMenu bar functions for SVCD/Video CD/ Audio CD CHAP. Chapter searchMP3/WMA disc playback OperationsAbout MP3/WMA discs Basic operationsRepeat playback Direct selectionMP3/WMA disc playback Jpeg disc playback About Jpeg discsBasic operations To see a desired pictureViewing pictures continuously slide show mode To zoom in the pictureTo start the slide show To select the start point of the slide showPress Repeat mode remains active Repeat functionWhile the Jpeg Control display is shown, press Repeat Press 3 to start repeat playbackKaraoke operation PreparationReserving songs Selecting audio Selecting audio track AudioKaraoke operation Selecting Karaoke sound Karaoke Example for SVCD, Video CD or Audio CD withKaraoke +R Stereo audio Left channel only Right channel onlyUsing the Effect button Adding an effect to your voiceAdding various effects to the vocal Vocal Adding an echo effect EchoUsing the KEY 9/KEY buttons Adjustable range is from -4 to +4Shifting the musical key Press KEY 9 or KEYChanging the initial settings How to set preferencesSelecting preferences About the Preference displayChanging the initial settings Language menuPicture menu Audio menu Others menuLimiting playback by children To set Parental Lock for the first timeBring up the Others menu Press 5/∞ to move To select Parental Lock then press EnterTo change the settings To temporarily release the Parental LockPress 5/∞ to move To select Parental Lock and press Enter Press 5/∞ to move to Temporary RELEASE, then press EnterAppendix a Country/Area code list for Parental Lock Additional informationAppendix C Digital output signal chart Appendix B Table of languages and their abbreviationsAdditional information Output Disc typeAppendix D Glossary AV Compu Link remote control system Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection Monaural mini-plugsAV Compu Link remote control system Automatic selection of TV’s input modeAutomatic power On/Off One-touch video playOperating other JVC products DVD playerOperating other manufacturers’ equipment Try to operate your DBS tuner by pressing DBSManufacturer Codes DBSChanging the transmittable signals for operating a Changing the transmittable signals for operating aOperating other manufacturers’ equipment Try to operate your VCR by pressing VCRTroubleshooting Problem Possible Cause SolutionGeneral Troubleshooting Surround/DSPFM/AM Video Active AudioStandard Jpeg KaraokeSpecifications AudioVideo DVD, DVD MULTI, DBS, VCR, TVSpecifications 220V 230 240V  2003 Victor Company of JAPAN, Limited 0603NHMMDWJEIN