JVC LVT1002-001B manual Activating TV Direct, Turning off the sounds temporarily- Muting

Page 18

Basic operations

The following are the analogue/digital signal format indicators on the display to indicate what type of signal comes into the receiver.

ANALOG: Lights when analogue input is selected.

LPCM: Lights when Linear PCM signal comes in.

DOLBY D: • Lights when Dolby Digital signal comes in.

•Flashes when “DGTL D.D.” is selected for software not encoded with Dolby Digital.

DTS: • Lights when DTS signal comes in.

•Flashes when “DGTL DTS” is selected for software not encoded with DTS.

NOTE

When “DGTL AUTO” cannot recognize the incoming signal, no digital signal format indicator lights up on the display.

To cancel TV Direct and turn off the receiver, press

STANDBY/ON on the front panel.

The receiver is turned off and the STANDBY lamp lights up.

To cancel TV Direct and turn on the receiver, press TV DIRECT. The receiver is turned on and the source indicator currently selected lights in red.

NOTES

•When TV Direct is activated, you cannot enjoy any of the sound effects this receiver produces, and cannot use the speakers connected to this receiver.

•You can use the T-V LINK function between the TV and VCR while TV Direct is activated. (For T-V LINK functions, refer to the manuals supplied with the TV and the VCR.)

•TV Direct cannot be used for the DVD MULTI playback mode (see page 34).

Activating TV Direct

TV Direct enables you to use this receiver as an AV selector while the receiver is not turned on.

When TV Direct is activated, the pictures and sounds go from the video components such as DVD player to the TV through this receiver. Thus, you can use the video components and the TV as if they were connected directly.

•This function takes effect for the following sources—DVD (except DVD MULTI), STB, and VCR when they are connected using the SCART cables.

To activate (or deactivate) TV Direct, follow the procedure below:

1Press TV DIRECT.

All the indications disappear, then the source indicator currently selected lights in green.

2Turn on the video component and TV.

3Select the target video component. On the front panel:

Turn SOURCE SELECTOR until one of the source indicator—DVD, VCR, or STB—lights in green.

From the remote control:

Press one of the source selecting buttons—DVD, VCR, or STB.

The source indicator corresponding to the selected source lights

in green.

Turning off the sounds temporarily— Muting

From the remote control ONLY:

Press MUTING to turn off the sound through all connected speakers.

“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

ANALOG L

 

R

 

 

 

 

SUBWFR

To restore the sound, press MUTING again.

•Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restores the sound.

13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RX-ES1SL XV-N55SL LVT1002-001BIf in Doubt Consult a Competent Electrician Important for Laser Products Reproduction of LabelsRX-ES1SL XV-N55SLDo not stack XV-N55SL and RX-ES1SL Above ALL Table of Contents When operating the player XV-N55SL, set the mode Remote controlWhen operating the receiver RX-ES1SL, set the mode Selector h to AUDIO/TV/VCR/STBRear panel Parts identificationFront panel Display windowFront panel AV OUT Video Signal SelectorDisplay window COAXIAL, OpticalPutting batteries in the remote control PrecautionsChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM MW antennasGetting started FM antenna suppliedConnecting the subwoofer Connecting the speakers and DVD playerSpeaker Layout Diagram Connecting the front, center, and surround speakersDigital connection Connecting other video componentsConnecting the DVD player XV-N55SL STB Set Top BoxScart connection Monaural Connecting the power cordAnalogue connection for DVD Multi playback see DVD Multi playback is not available for XV-N55SLSelecting the analogue or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeSelecting the digital decode mode Basic operationsActivating TV Direct To cancel TV Direct and turn off the receiver, pressTo restore the sound, press Muting again Turning off the sounds temporarily- MutingSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory Changing the display brightnessSpeaker settings From the remote control onlyTV/VCR/STB Speaker settings When selecting Medium Room Setting the speakers sizeOperating procedure When selecting Large RoomSetting the low frequency effect attenuator -LFE Setting the speaker delay timeSetting the crossover frequency-CROSS Setting the dynamic range compression -D.COMPDigital 3DVD player Initial setting Basic settingsOperating procedure Digital 2STBSetting Auto Surround-AUTO SR Setting the Auto Function mode-MODEBasic settings Adjusting the subwoofer output level Sound adjustmentsAdjusting the tone-BASS, Treble Press AdjustSound adjustments Adjusting the front speakers output balance-BALAttenuating the input signal-ATT Setting the subwoofer audio positionTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationTuner operations Press Display while listening to an FM station Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? Frequency RT Normal indicationPress PTY Search while listening to an FM station To search for a program using the PTY codesDescription of the PTY codes PTY codesTA Traffic Announcement in your area Switching to broadcast program of your choice temporarilyNone TA/NEWS/INFO NEWS/INFO News NewsIntroducing the Surround/DSP modes Creating realistic sound fieldsReproducing theater ambience Surround modesCreating realistic sound fields DSP Digital Signal Processor modesAvailable Surround/DSP modes for each input signal DAP Digital Acoustic Processor modesUsing Surround modes Dolby D or DTS Stereo Surround/DSP offPress Test again to stop the test tone Turn Multi JOG to select a appropriate surround modePress Test to check the speakers output balance Select and play software you like Press SurroundAlways set the mode selector to AUDIO/TV/VCR/STB Using DSP modesRepeat steps 5 and 6 to adjust the other settings To cancel Surround modeTo adjust the DAP effect level To cancel DSP ModesEffect available only for DAP modes *2 From the remote control Press DVD Multi Using the DVD Multi playback modeAdjusting the speaker output level Turn Source Selector until DVD Multi appears on the displayBefore operation About this manualAbout discs Initial setup Turning on/off the playerIf a menu is shown on the TV screen To bring up the DVD Player SET UP display laterBasic playback About PBC Playback ControlResuming playback Various speed playback Using the numeric buttons Locating the beginning of a scene or songTo replay the previous scenes One touch replay function Locating a desired scene from the DVD menu Advanced operationsPlaying from a specific position Specifying a desired titleAdvanced operations Changing the playback orderTo play back in a specific order Program play To dismiss the menu barTo play back in random order Random play To stop repeat playback Repeat playbackTo repeat a desired part A-B repeat playback To quit repeat playbackChanging the language, sound and scene angle To change the audio language or sound AudioTo select a scene angle of DVD Video Angle To zoom in pictures To adjust the picture character VFPSpecial picture/sound effect To return to the normal playbackTo simulate surround sound 3D Phonic Basic operation procedureMenu bar functions To bring up the menu barMenu bar functions for SVCD/Video CD/ Audio CD Time mode selectionMenu bar functions for DVD Video CHAP. Chapter searchAbout MP3/WMA discs MP3/WMA disc playbackOperations Basic operationsRepeat playback Direct selectionMP3/WMA disc playback Basic operations Jpeg disc playbackAbout Jpeg discs To see a desired pictureTo start the slide show Viewing pictures continuously slide show modeTo zoom in the picture To select the start point of the slide showWhile the Jpeg Control display is shown, press Repeat Press Repeat mode remains activeRepeat function Press 3 to start repeat playbackSelecting preferences Changing the initial settingsHow to set preferences About the Preference displayChanging the initial settings Language menuPicture menu Audio menu Others menuBring up the Others menu Limiting playback by childrenTo set Parental Lock for the first time Press 5/∞ to move To select Parental Lock then press EnterPress 5/∞ to move To select Parental Lock and press Enter To change the settingsTo temporarily release the Parental Lock Press 5/∞ to move to Temporary RELEASE, then press EnterAppendix a Country/Area code list for Parental Lock Additional informationFor Appendix C Digital output signal chartFor pages 45 Output Disc typeAppendix D Glossary Operating other JVC products DVD playerTry to operate your STB by pressing STB Changing the transmittable signals for operating anOperating other manufacturers’ equipment Manufacturer CodesOperating other manufacturers’ equipment Changing the transmittable signals for operating aChanging the transmittable signals for operating a Try to operate your VCR by pressing VCRTroubleshooting Problem Possible Cause SolutionGeneral Troubleshooting FM/AM Problem Possible Cause SolutionSurround/DSP Standard Video ActiveRGB/COMP Operation Picture AudioFM tuner IHF SpecificationsAmplifier AM MW tunerOther SpecificationsAudio characteristics Video outputs 2003 Victor Company of JAPAN, Limited 0203NHMMDWJEIN

LVT1002-001B specifications

The JVC LVT1002-001B is a versatile and user-friendly remote control designed to enhance the experience of JVC audio and video products. Its sleek design and intuitive layout make it an indispensable accessory for users looking to navigate their entertainment systems seamlessly.

One of the most notable features of the JVC LVT1002-001B is its compatibility with a wide range of JVC devices. Whether you are operating a television, DVD player, Blu-ray player, or sound system, this remote control provides comprehensive functionality, eliminating the need for multiple remotes cluttering your living space. This universal compatibility makes it an ideal solution for households that utilize various JVC products.

The remote features a well-organized button layout, allowing users to access the most frequently used functions with ease. Large, clearly labeled buttons for volume control, channel selection, and playback functions ensure that users can make adjustments without hassle. Additionally, the remote includes dedicated buttons for quick access to settings and source selection, further enhancing its usability.

Among its advanced technologies, the LVT1002-001B employs infrared (IR) technology, which allows for reliable communication between the remote and the targeted JVC devices. This ensures that commands are executed promptly, providing a smooth and responsive user experience. Moreover, the remote is built with durable materials, designed to withstand everyday use, making it a long-lasting component of your audio-visual setup.

The JVC LVT1002-001B also includes features such as a range of programmable buttons, allowing users to personalize their experience. This means users can set up macros for their favorite activities, like watching a movie or listening to music, where multiple commands can be executed with a single button press, streamlining the entertainment experience.

Furthermore, the remote is designed with energy efficiency in mind. It uses standard batteries that are easy to replace, ensuring that users can keep their remote functional without hassle. The battery life is optimized to last longer, reducing the frequency of replacements and contributing to a more eco-friendly lifestyle.

In summary, the JVC LVT1002-001B remote control combines functionality, durability, and user-friendly features into one device, making it an essential tool for anyone looking to enhance their JVC audio and video experience. Its universal compatibility, intuitive design, and programmable options highlight its role as a key accessory for modern entertainment systems.
Top Page Image Contents