JVC LVT1002-001B Basic playback, If a menu is shown on the TV screen, About PBC Playback Control

Basic operations

5 Press ENTER.

The third page is shown, in which the pull-down menu of the [DIGITAL AUDIO OUTPUT] is already open.

DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT	DOLBY DIGITAL/PCM
ANALOG DOWN MIX	PCM ONLY
	DOLBY PROLOGIC
	DOLBY DIGITAL/PCM
D RANGE CONTROL	STREAM/PCM
OUTPUT LEVEL

SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER

DIGITAL AUDIO OUTPUT options

6 Press 5/∞ to select a desired digital output signal type.

Set this item correctly when you connect the player to an external surround decoder or D/A converter. (If you do not connect the player to such a device, you do not have to set this item.)

•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

•When connecting to a DTS decoder, select [STREAM/ PCM].

•When connecting to other digital device, select [PCM ONLY].

7 Press ENTER.

The TV screen returns to the opening display.

To bring up the DVD PLAYER SET UP display later

Press CHOICE for a few seconds until the DVD PLAYER SET UP display appears.

To change the brightness of the display window

Press DIMMER on the remote control.

You can select the display window brightness from three levels, or off. If the brightness is set to off, nothing will be shown on the display.

Basic playback

1 Press 0 to open the disc tray.

2 Place a disc in the disc tray.

With the label side up

• To insert an 8-cm disc, place it in the inner recess.

3 Press 3.

The player starts playback from the beginning.

If a menu is shown on the TV screen

When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.

For DVD VIDEO

1Press 5/∞/2/3 to select a desired item.

2Press ENTER.

The player starts playback of the selected item.

For SVCD/Video CD

Press the numeric buttons to select a desired item. The player starts playback of the selected item.

NOTES

•Do not insert an unplayable disc. (See page 35.)

•When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.

About PBC (Playback Control)

Some SVCD/Video CD discs support the PBC function.

The PBC function allows you to enjoy menu-driven operation and high-resolution still images which have a resolution four times greater than moving pictures.

•To play a PBC-compatible SVCD/Video CD disc without activating the PBC function, press the numeric buttons instead of 3 to start playback.

•To activate the PBC function again, 1) press TOP MENU or MENU,

or

2) press 7 to stop playback, then press 3.

37