JVC LVT1002-001B manual Setting Auto Surround-AUTO SR, Setting the Auto Function mode-MODE

Basic settings

Setting Auto Surround—AUTO SR

You can enjoy Surround mode simply by selecting the source (with digital input selected for that source).

Select “ON” when activating Auto Surround.

ON: • If multi-channel signal comes in, an appropriate Surround mode will be turned on.

•If Dolby Digital 2 channel or DTS 2 channel signal including surround signal comes in, “PL II MOVIE” will be selected.

•If Dolby Digital 2 channel or DTS 2 channel signal not including surround signal comes in, “STEREO” will be selected.

•If Linear PCM signal comes in, nothing will change.

The AUTO SR indicator lights up on the display.

OFF*: Select this to deactivate Auto Surround.

*Initial setting

NOTES

•This function does not take effect in the following cases:

–While playing an analogue source, and

–While selecting “DGTL D.D.” or “DGTL DTS” as the fixed digital input mode (see page 12).

•If Surround mode is automatically activated by Auto Surround, any other Surround mode in use will be canceled temporarily. When the multi-channel digital signal stops coming in, “PL II MOVIE” activates.

•If you press SURROUND with Auto Surround activated, Auto Surround will be canceled temporarily for the currently selected source.

Auto Surround setting will be restored in the following cases:

–When you turn the receiver off and on,

–When you change the source,

–When you change the analogue/digital input, and

–When you reset “AUTO SR” to “ON” again.

Setting the Auto Function mode—MODE

The video components can be operated through this receiver by activating Auto Function mode.

•This function takes effect for the following sources—DVD (except DVD MULTI), STB, and VCR, when they are connected using SCART cables.

AUTO1:	When a video component is turned on while the receiver
	is on, the receiver selects the video component as the
	source automatically.
	The AUTO MODE indicator lights up on the display.
AUTO2:	When a video component is turned on while the
	receiver is on or TV Direct activates, the receiver
	selects the video component as the source
	automatically.
	When a video component is turned on while the
	receiver is off, TV Direct activates and the receiver
	selects the video component as the source
	automatically.
	When a video component currently selected as the
	source is turned off while the receiver is on or TV
	Direct activates, the receiver changes the source to the
	previously selected one.
	When all video components are turned off while the
	receiver is on or TV Direct activates, the receiver is
	turned off automatically.
	The AUTO MODE indicator lights up on the display.
MANUAL*:	Select the source manually.

*Initial setting

NOTE

When selecting VCR as the source, “AUTO1” or “AUTO2” may not work if you only turn on the VCR. If this happens, you may need to start playback to activate Auto Function mode.

20