JVC LVT1002-001B manual Press Test to check the speakers output balance

Page 36

Creating realistic sound fields

3Press TEST to check the speakers output balance.

“TEST L” starts flashing on the display, and a test tone comes out

of the speakers as follow:

 

L

 

 

 

R

PL ΙΙ

LPCM

SUBWFR

 

 

 

 

 

VOL

TEST L TEST C TEST R

(Left front speaker) (Center speaker) (Right front speaker)

TEST LS

 

TEST RS

 

(Left surround speaker) (Right surround speaker)

4Adjust the following speaker output levels (from –10 dB to +10 dB).

Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.

To adjust the center speaker level,

press CENTER +/–.

To adjust the left surround speaker level,

press SURR L +/–.

To adjust the right surround speaker level,

press SURR R +/–.

L

 

 

 

R

PL ΙΙ

LPCM SUBWFR

VOL

Ex.: When selecting “+8 (dB)” for “CENTER.”

5Press TEST again to stop the test tone.

The currently selected source name appears on the display.

On the front panel:

No test tone is available when using the buttons on the front panel.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

 

 

 

 

 

 

 

 

 

 

 

SOURCE SELECTOR

MASTER VOLUME

 

TV DIRECT

SETTING

ADJUST

SURROUND

 

 

 

 

 

SET / TUNER PRESET

/ MULTI JOG

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONES

STANDBY / ON

STANDBY

 

 

 

DVD MULTI

DVD

STB

VCB

TV

FM / AM

 

 

1Select and play software you like.

2Press SURROUND.

MULTI JOG now works for the Surround/DSP mode selection.

3Turn MULTI JOG to select a appropriate surround mode.

• As you turn MULTI JOG, the indication changes as follow:

When playing back multi-channel digital software such as Dolby Digital or DTS Digital Surround:

 

L C

 

R

 

 

 

 

 

 

 

 

 

SUBWFR LFE

 

DOLBY D

 

 

 

 

 

LS

 

RS

VOL

 

 

 

 

 

 

 

 

DOLBY D or DTS STEREO (Surround/DSP off)

When playing back 2 channel digital software such as Dolby Digital or DTS Digital Surround:

PL II MOVIE

 

PL II MUSIC

 

STEREO (Surround/DSP off)

When playing back any software other than above:

PL II MOVIE

 

 

 

 

 

 

PL II MUSIC

 

 

 

 

 

 

 

 

 

 

LIVE CLUB

 

 

 

 

DANCE CLUB

 

 

 

 

 

HALL

 

 

 

 

 

 

PAVILION

 

 

 

 

 

 

 

 

 

 

ALL CH ST.

 

 

STEREO (Surround/DSP off)

 

(Back to the beginning)

 

 

 

 

 

 

 

If “AUTO SR (Auto Surround)” is set to “ON”

Playing a digital source automatically activates an appropriate Surround mode. (See page 20.) Go to step 3.

4Press ADJUST.

MULTI JOG now works for the sound adjustment.

5Turn MULTI JOG until the setting item you want to set appears on the display, then press SET.

As you turn MULTI JOG, the indication changes as follow:

L R PL ΙΙ

LPCM SUBWFR

VOL

BASS

 

 

TREBLE

 

 

 

SUBWFR

 

 

 

 

 

 

 

 

CENTER

 

 

SURR L

 

 

 

SURR R

 

 

 

 

 

 

 

 

 

EFFECT

 

 

 

PANORAMA*

 

 

 

BAL

 

 

 

 

 

 

 

B.BOOST

 

 

ATT

 

 

(Back to the beginning)

 

 

 

* Available only for “PL II MUSIC.”

CONTINUED ON THE NEXT PAGE

31

Image 36
Contents RX-ES1SL XV-N55SL LVT1002-001BIf in Doubt Consult a Competent Electrician Important for Laser Products Reproduction of LabelsRX-ES1SL XV-N55SLDo not stack XV-N55SL and RX-ES1SL Above ALL Table of Contents Remote control When operating the receiver RX-ES1SL, set the modeWhen operating the player XV-N55SL, set the mode Selector h to AUDIO/TV/VCR/STBParts identification Front panelRear panel Display windowAV OUT Video Signal Selector Display windowFront panel COAXIAL, OpticalPrecautions Checking the supplied accessoriesPutting batteries in the remote control Getting startedConnecting the FM and AM MW antennas Getting startedFM antenna connection FM antenna suppliedConnecting the speakers and DVD player Speaker Layout DiagramConnecting the subwoofer Connecting the front, center, and surround speakersConnecting other video components Connecting the DVD player XV-N55SLDigital connection STB Set Top BoxScart connection Connecting the power cord Analogue connection for DVD Multi playback seeMonaural DVD Multi playback is not available for XV-N55SLTurn on the power To turn off the power into standbySelecting the analogue or digital input mode Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones Basic operationsTo cancel TV Direct and turn off the receiver, press To restore the sound, press Muting againActivating TV Direct Turning off the sounds temporarily- MutingTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Changing the display brightnessSpeaker settings From the remote control onlyTV/VCR/STB Speaker settings Setting the speakers size Operating procedureWhen selecting Medium Room When selecting Large RoomSetting the speaker delay time Setting the crossover frequency-CROSSSetting the low frequency effect attenuator -LFE Setting the dynamic range compression -D.COMPBasic settings Operating procedureDigital 3DVD player Initial setting Digital 2STBSetting Auto Surround-AUTO SR Setting the Auto Function mode-MODEBasic settings Sound adjustments Adjusting the tone-BASS, TrebleAdjusting the subwoofer output level Press AdjustAdjusting the front speakers output balance-BAL Attenuating the input signal-ATTSound adjustments Setting the subwoofer audio positionTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationTuner operations Using the RDS Radio Data System to receive FM stations What information can RDS signals provide?Press Display while listening to an FM station Frequency RT Normal indicationTo search for a program using the PTY codes Description of the PTY codesPress PTY Search while listening to an FM station PTY codesSwitching to broadcast program of your choice temporarily None TA/NEWS/INFO NEWS/INFOTA Traffic Announcement in your area News NewsCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround/DSP modes Surround modesDSP Digital Signal Processor modes Available Surround/DSP modes for each input signalCreating realistic sound fields DAP Digital Acoustic Processor modesUsing Surround modes Dolby D or DTS Stereo Surround/DSP offTurn Multi JOG to select a appropriate surround mode Press Test to check the speakers output balancePress Test again to stop the test tone Select and play software you like Press SurroundUsing DSP modes Repeat steps 5 and 6 to adjust the other settingsAlways set the mode selector to AUDIO/TV/VCR/STB To cancel Surround modeTo adjust the DAP effect level To cancel DSP ModesEffect available only for DAP modes *2 Using the DVD Multi playback mode Adjusting the speaker output levelFrom the remote control Press DVD Multi Turn Source Selector until DVD Multi appears on the displayBefore operation About this manualAbout discs Initial setup Turning on/off the playerTo bring up the DVD Player SET UP display later Basic playbackIf a menu is shown on the TV screen About PBC Playback ControlResuming playback Various speed playback Using the numeric buttons Locating the beginning of a scene or songTo replay the previous scenes One touch replay function Advanced operations Playing from a specific positionLocating a desired scene from the DVD menu Specifying a desired titleChanging the playback order To play back in a specific order Program playAdvanced operations To dismiss the menu barTo play back in random order Random play Repeat playback To repeat a desired part A-B repeat playbackTo stop repeat playback To quit repeat playbackChanging the language, sound and scene angle To change the audio language or sound AudioTo select a scene angle of DVD Video Angle To adjust the picture character VFP Special picture/sound effectTo zoom in pictures To return to the normal playbackBasic operation procedure Menu bar functionsTo simulate surround sound 3D Phonic To bring up the menu barTime mode selection Menu bar functions for DVD VideoMenu bar functions for SVCD/Video CD/ Audio CD CHAP. Chapter searchMP3/WMA disc playback OperationsAbout MP3/WMA discs Basic operationsRepeat playback Direct selectionMP3/WMA disc playback Jpeg disc playback About Jpeg discsBasic operations To see a desired pictureViewing pictures continuously slide show mode To zoom in the pictureTo start the slide show To select the start point of the slide showPress Repeat mode remains active Repeat functionWhile the Jpeg Control display is shown, press Repeat Press 3 to start repeat playbackChanging the initial settings How to set preferencesSelecting preferences About the Preference displayChanging the initial settings Language menuPicture menu Audio menu Others menuLimiting playback by children To set Parental Lock for the first timeBring up the Others menu Press 5/∞ to move To select Parental Lock then press EnterTo change the settings To temporarily release the Parental LockPress 5/∞ to move To select Parental Lock and press Enter Press 5/∞ to move to Temporary RELEASE, then press EnterAppendix a Country/Area code list for Parental Lock Additional informationAppendix C Digital output signal chart For pages 45For Output Disc typeAppendix D Glossary Operating other JVC products DVD playerChanging the transmittable signals for operating an Operating other manufacturers’ equipmentTry to operate your STB by pressing STB Manufacturer CodesChanging the transmittable signals for operating a Changing the transmittable signals for operating aOperating other manufacturers’ equipment Try to operate your VCR by pressing VCRTroubleshooting Problem Possible Cause SolutionGeneral Troubleshooting FM/AM Problem Possible Cause SolutionSurround/DSP Video Active RGB/COMPStandard Operation Picture AudioSpecifications AmplifierFM tuner IHF AM MW tunerSpecifications Audio characteristicsOther Video outputs 2003 Victor Company of JAPAN, Limited 0203NHMMDWJEIN

LVT1002-001B specifications

The JVC LVT1002-001B is a versatile and user-friendly remote control designed to enhance the experience of JVC audio and video products. Its sleek design and intuitive layout make it an indispensable accessory for users looking to navigate their entertainment systems seamlessly.

One of the most notable features of the JVC LVT1002-001B is its compatibility with a wide range of JVC devices. Whether you are operating a television, DVD player, Blu-ray player, or sound system, this remote control provides comprehensive functionality, eliminating the need for multiple remotes cluttering your living space. This universal compatibility makes it an ideal solution for households that utilize various JVC products.

The remote features a well-organized button layout, allowing users to access the most frequently used functions with ease. Large, clearly labeled buttons for volume control, channel selection, and playback functions ensure that users can make adjustments without hassle. Additionally, the remote includes dedicated buttons for quick access to settings and source selection, further enhancing its usability.

Among its advanced technologies, the LVT1002-001B employs infrared (IR) technology, which allows for reliable communication between the remote and the targeted JVC devices. This ensures that commands are executed promptly, providing a smooth and responsive user experience. Moreover, the remote is built with durable materials, designed to withstand everyday use, making it a long-lasting component of your audio-visual setup.

The JVC LVT1002-001B also includes features such as a range of programmable buttons, allowing users to personalize their experience. This means users can set up macros for their favorite activities, like watching a movie or listening to music, where multiple commands can be executed with a single button press, streamlining the entertainment experience.

Furthermore, the remote is designed with energy efficiency in mind. It uses standard batteries that are easy to replace, ensuring that users can keep their remote functional without hassle. The battery life is optimized to last longer, reducing the frequency of replacements and contributing to a more eco-friendly lifestyle.

In summary, the JVC LVT1002-001B remote control combines functionality, durability, and user-friendly features into one device, making it an essential tool for anyone looking to enhance their JVC audio and video experience. Its universal compatibility, intuitive design, and programmable options highlight its role as a key accessory for modern entertainment systems.