JVC LVT1002-001B manual Specifications, Amplifier, FM tuner IHF, AM MW tuner, General

Page 73
1 V(p-p)/75Ω
0.286 V(p-p)/75Ω
0.7 V(p-p)/75Ω
45 dB Negative

Specifications

Designs & specifications are subject to change without notice.

RX-ES1SL

Amplifier

Output Power

At stereo operation:

 

Front channels:

100 W per channel, min. RMS, both channels

 

driven into 8 Ω at 1 kHz with no more than

 

10% total harmonic distortion. (IEC268-3)

At surround operation:

Front channels:

100 W per channel, min. RMS, driven into

 

8 Ω at 1 kHz with no more than 0.8% total

 

harmonic distortion.

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz,

with no more than 0.8% total harmonic distortion.

Surround channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

FM tuner (IHF)

Tuning Range:

87.50 MHz to 108.00 MHz

Usable Sensitivity:

 

Monaural:

17.0 dBf (1.95 µV/75 Ω)

50 dB Quieting Sensitivity:

 

Monaural:

21.3 dBf (3.2 µV/75 Ω)

Stereo:

41.3 dBf (31.5 µV/75 Ω)

Stereo Separation at REC OUT:

35 dB at 1 kHz

AM (MW) tuner

Tuning Range:

 

MW:

522 kHz to 1 629 kHz

Audio

Audio Input Sensitivity/Impedance (1 kHz):

DVD, DVD MULTI, STB, VCR, TV:

260 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1 (DVD): 0.5 V(p-p)/75 Ω

Optical: DIGITAL 2/3 (STB/TV):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:VCR, TV:

250 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

 

DVD MULTI:

87 dB/62 dB

Frequency Response (8 Ω):

 

DVD, STB, VCR, TV:

20 Hz to 20 kHz (±1 dB)

Tone Control:

 

Bass (100 Hz):

±10 dB ±2 dB

Treble (10 kHz):

±10 dB ±2 dB

Bass Boost:

+4 dB ± 1 dB at 100 Hz

Video

Video Input Sensitivity/Impedance (1 kHz):

Composite video:DVD, STB, VCR:

1 V(p-p)/75 Ω

S-VIDEO:DVD, STB, VCR:

 

(Y:luminance):

1 V(p-p)/75 Ω

(C:chrominance):

0.286 V(p-p)/75 Ω

RGB:DVD, STB, VCR:

0.7 V(p-p)/75 Ω

Video Output Level/Impedance (1 kHz):

Composite video:VCR, TV: 1 V(p-p)/75 Ω

S-VIDEO:VCR, TV:

(Y:luminance):

(C:chrominance):

RGB:TV:

Signal-to-Noise Ratio (S/N):

Synchronize:

General

Power Requirements:

AC 230V , 50 Hz

Power Consumption:

105 W (at operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 69.5 mm x 330.5 mm

Mass:

6.6 kg

68

Page 72 Page 74
Image 73
Page 72 Page 74
Contents LVT1002-001B RX-ES1SL XV-N55SLIf in Doubt Consult a Competent Electrician Reproduction of Labels Important for Laser ProductsXV-N55SL RX-ES1SLDo not stack XV-N55SL and RX-ES1SL Above ALL Table of Contents When operating the receiver RX-ES1SL, set the mode Remote controlWhen operating the player XV-N55SL, set the mode Selector h to AUDIO/TV/VCR/STBFront panel Parts identificationRear panel Display windowDisplay window AV OUT Video Signal SelectorFront panel COAXIAL, OpticalChecking the supplied accessories PrecautionsPutting batteries in the remote control Getting startedGetting started Connecting the FM and AM MW antennasFM antenna connection FM antenna suppliedSpeaker Layout Diagram Connecting the speakers and DVD playerConnecting the subwoofer Connecting the front, center, and surround speakersConnecting the DVD player XV-N55SL Connecting other video componentsDigital connection STB Set Top BoxScart connection Analogue connection for DVD Multi playback see Connecting the power cordMonaural DVD Multi playback is not available for XV-N55SLTo turn off the power into standby Turn on the powerSelecting the analogue or digital input mode Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Basic operationsTo restore the sound, press Muting again To cancel TV Direct and turn off the receiver, pressActivating TV Direct Turning off the sounds temporarily- MutingBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Changing the display brightnessFrom the remote control only Speaker settingsTV/VCR/STB Speaker settings Operating procedure Setting the speakers sizeWhen selecting Medium Room When selecting Large RoomSetting the crossover frequency-CROSS Setting the speaker delay timeSetting the low frequency effect attenuator -LFE Setting the dynamic range compression -D.COMPOperating procedure Basic settingsDigital 3DVD player Initial setting Digital 2STBSetting the Auto Function mode-MODE Setting Auto Surround-AUTO SRBasic settings Adjusting the tone-BASS, Treble Sound adjustmentsAdjusting the subwoofer output level Press AdjustAttenuating the input signal-ATT Adjusting the front speakers output balance-BALSound adjustments Setting the subwoofer audio positionUsing preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeTuner operations What information can RDS signals provide? Using the RDS Radio Data System to receive FM stationsPress Display while listening to an FM station Frequency RT Normal indicationDescription of the PTY codes To search for a program using the PTY codesPress PTY Search while listening to an FM station PTY codesNone TA/NEWS/INFO NEWS/INFO Switching to broadcast program of your choice temporarilyTA Traffic Announcement in your area News NewsReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround/DSP modes Surround modesAvailable Surround/DSP modes for each input signal DSP Digital Signal Processor modesCreating realistic sound fields DAP Digital Acoustic Processor modesDolby D or DTS Stereo Surround/DSP off Using Surround modesPress Test to check the speakers output balance Turn Multi JOG to select a appropriate surround modePress Test again to stop the test tone Select and play software you like Press SurroundRepeat steps 5 and 6 to adjust the other settings Using DSP modesAlways set the mode selector to AUDIO/TV/VCR/STB To cancel Surround modeTo cancel DSP Modes To adjust the DAP effect levelEffect available only for DAP modes *2 Adjusting the speaker output level Using the DVD Multi playback modeFrom the remote control Press DVD Multi Turn Source Selector until DVD Multi appears on the displayAbout this manual Before operationAbout discs Turning on/off the player Initial setupBasic playback To bring up the DVD Player SET UP display laterIf a menu is shown on the TV screen About PBC Playback ControlResuming playback Various speed playback Locating the beginning of a scene or song Using the numeric buttonsTo replay the previous scenes One touch replay function Playing from a specific position Advanced operationsLocating a desired scene from the DVD menu Specifying a desired titleTo play back in a specific order Program play Changing the playback orderAdvanced operations To dismiss the menu barTo play back in random order Random play To repeat a desired part A-B repeat playback Repeat playbackTo stop repeat playback To quit repeat playbackTo change the audio language or sound Audio Changing the language, sound and scene angleTo select a scene angle of DVD Video Angle Special picture/sound effect To adjust the picture character VFPTo zoom in pictures To return to the normal playbackMenu bar functions Basic operation procedureTo simulate surround sound 3D Phonic To bring up the menu barMenu bar functions for DVD Video Time mode selectionMenu bar functions for SVCD/Video CD/ Audio CD CHAP. Chapter searchOperations MP3/WMA disc playbackAbout MP3/WMA discs Basic operationsDirect selection Repeat playbackMP3/WMA disc playback About Jpeg discs Jpeg disc playbackBasic operations To see a desired pictureTo zoom in the picture Viewing pictures continuously slide show modeTo start the slide show To select the start point of the slide showRepeat function Press Repeat mode remains activeWhile the Jpeg Control display is shown, press Repeat Press 3 to start repeat playbackHow to set preferences Changing the initial settingsSelecting preferences About the Preference displayLanguage menu Changing the initial settingsPicture menu Others menu Audio menuTo set Parental Lock for the first time Limiting playback by childrenBring up the Others menu Press 5/∞ to move To select Parental Lock then press EnterTo temporarily release the Parental Lock To change the settingsPress 5/∞ to move To select Parental Lock and press Enter Press 5/∞ to move to Temporary RELEASE, then press EnterAdditional information Appendix a Country/Area code list for Parental LockFor pages 45 Appendix C Digital output signal chartFor Output Disc typeAppendix D Glossary DVD player Operating other JVC productsOperating other manufacturers’ equipment Changing the transmittable signals for operating anTry to operate your STB by pressing STB Manufacturer CodesChanging the transmittable signals for operating a Changing the transmittable signals for operating aOperating other manufacturers’ equipment Try to operate your VCR by pressing VCRProblem Possible Cause Solution TroubleshootingGeneral FM/AM Problem Possible Cause Solution TroubleshootingSurround/DSP RGB/COMP Video ActiveStandard Operation Picture AudioAmplifier SpecificationsFM tuner IHF AM MW tunerAudio characteristics SpecificationsOther Video outputs 2003 Victor Company of JAPAN, Limited 0203NHMMDWJEIN

LVT1002-001B specifications

The JVC LVT1002-001B is a versatile and user-friendly remote control designed to enhance the experience of JVC audio and video products. Its sleek design and intuitive layout make it an indispensable accessory for users looking to navigate their entertainment systems seamlessly.

One of the most notable features of the JVC LVT1002-001B is its compatibility with a wide range of JVC devices. Whether you are operating a television, DVD player, Blu-ray player, or sound system, this remote control provides comprehensive functionality, eliminating the need for multiple remotes cluttering your living space. This universal compatibility makes it an ideal solution for households that utilize various JVC products.

The remote features a well-organized button layout, allowing users to access the most frequently used functions with ease. Large, clearly labeled buttons for volume control, channel selection, and playback functions ensure that users can make adjustments without hassle. Additionally, the remote includes dedicated buttons for quick access to settings and source selection, further enhancing its usability.

Among its advanced technologies, the LVT1002-001B employs infrared (IR) technology, which allows for reliable communication between the remote and the targeted JVC devices. This ensures that commands are executed promptly, providing a smooth and responsive user experience. Moreover, the remote is built with durable materials, designed to withstand everyday use, making it a long-lasting component of your audio-visual setup.

The JVC LVT1002-001B also includes features such as a range of programmable buttons, allowing users to personalize their experience. This means users can set up macros for their favorite activities, like watching a movie or listening to music, where multiple commands can be executed with a single button press, streamlining the entertainment experience.

Furthermore, the remote is designed with energy efficiency in mind. It uses standard batteries that are easy to replace, ensuring that users can keep their remote functional without hassle. The battery life is optimized to last longer, reducing the frequency of replacements and contributing to a more eco-friendly lifestyle.

In summary, the JVC LVT1002-001B remote control combines functionality, durability, and user-friendly features into one device, making it an essential tool for anyone looking to enhance their JVC audio and video experience. Its universal compatibility, intuitive design, and programmable options highlight its role as a key accessory for modern entertainment systems.
Top Page Image Contents