Wire connection Power supply cord | Whirlpool W10151492B specs

Put power supply cord through the strain relief. Be sure that the wire insulation on the power supply cord is inside the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Do not further tighten strain relief screws at this point.

Style 2: Direct wire strain relief

Unscrew the removable conduit connector and any screws from a 3⁄4" (19 mm) UL listed strain relief (UL marking on strain relief). Put the threaded section of the strain relief through the hole below the terminal block opening. Reaching inside the terminal block opening, screw the removable conduit connector onto the strain relief threads.

A. Removable conduit connector

B. Hole below terminal block opening

C. Strain relief threads

Put direct wire cable through the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Tighten strain relief screw against the direct wire cable.

4.Now complete installation following instructions for your type of electrical connection:

4-wire(recommended)

3-wire(if 4-wire is not available)

Electrical Connection Options

If your home has:	And you will be	Go to Section:
	connecting to:
4-wire receptacle	A UL listed,	4-wire connection:
(NEMA type 14-30R)	120/240-volt	Power Supply Cord
	minimum,	Power Supply Cord
	minimum,
	30-amp, dryer
	power supply
	cord*
4-wire direct	A fused	4-wire connection:
	disconnect or	Direct Wire
	circuit breaker	Direct Wire
	circuit breaker
5"	box*
5"
(127 mm)
3-wire receptacle	A UL listed,	3-wire connection:
(NEMA type 10-30R)	120/240-volt	Power Supply Cord
	minimum,	Power Supply Cord
	minimum,
	30-amp, dryer
	power supply
	cord*
3-wire direct	A fused	3-wire connection:
	disconnect or	Direct Wire
	circuit breaker	Direct Wire
	circuit breaker
31⁄2 "	box*
(89 mm)

*If local codes do not permit the connection of a cabinet-ground conductor to the neutral wire, go to “Optional 3-wire connection” section.

4-wire connection: Power supply cord

IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections.

BF A

C DEG

A.4-wire receptacle (NEMA type 14-30R)

B.4-prong plug

C.Ground prong

D.Neutral prong

E.Spade terminals with upturned ends

F. 3⁄4" (19 mm) UL listed strain relief

G. Ring terminals

W10151493B, W10151492B specifications

The Whirlpool W10151492B and W10151493B are high-performance refrigerator water filters designed to enhance the quality of drinking water and ice while maintaining the overall health and safety standards for your household. These models are compatible with a range of Whirlpool refrigerators and provide an efficient solution for reducing contaminants commonly found in tap water.

One of the main features of the W10151492B and W10151493B is their advanced filtration technology. Employing an activated carbon filtration system, these filters are capable of reducing harmful impurities such as chlorine, lead, mercury, pesticides, and pharmaceuticals. This not only improves the taste and odor of the water but also ensures that it is safe for consumption, making these filters an ideal choice for families looking to consume clean, refreshing water directly from their refrigerator.

Another defining characteristic of these filters is their focus on convenience and user-friendliness. Designed for easy installation and replacement, both models come with clear instructions to ensure that users can effortlessly replace the filter themselves. This eliminates the need for professional installation services, making maintenance simpler and more accessible for the average consumer.

The W10151492B and W10151493B filters also boast a high capacity, with the ability to filter up to approximately 200 gallons of water, depending on water quality and usage. This long-lasting capability aids in reducing the frequency of filter replacements, thus minimizing both cost and environmental impact.

In addition to their functional benefits, these filters are certified by the National Sanitation Foundation (NSF), affirming that they meet stringent public health and safety standards. This certification provides peace of mind to consumers, ensuring that their filtration system is not only effective but also trustworthy.

Moreover, the W10151492B and W10151493B demonstrate an eco-conscious approach; they help reduce reliance on bottled water, contributing to less plastic waste in landfills. Choosing these filters represents a smart choice for environmentally aware households.

In summary, the Whirlpool W10151492B and W10151493B filters stand out with their combination of advanced filtration technology, ease of installation, long-lasting capacity, and certification by NSF. These features work together to provide clean, safe, and great-tasting water, catering to the needs of modern households who prioritize health, convenience, and sustainability.