3 Press the number buttons |
select a channel number while the channel |
From the remote control ONLY:
number position is flashing. |
The channel number and the CH indicator start flashing.
Ex.:
•For channel number 3, press 3.
•For channel number 14, press +10 then 4.
(For FM stations only)
•For channel number 24, press +10, +10, then 4.
•For channel number 30, press +10, +10, then 10.
L R
CH | S.WFR |
TUNED 
ST AUTO MUTING
SLEEP |
|
|
|
| 7 + | 8 + | 9 + |
SETTING | |||
| – | – | – |
| 10 | 0 | +10 |
ADJUST TV RETURN | FM MODE | 100+ | |
TA/NEWS/INFO
ON |
|
SCREEN | DVD |
|
RDS
PTY( | ENTER | PTY9 |
|
| |
CHOICE |
| VFP |
RDS DISPLAY
PTY SEARCH
Set the remote control mode selector to “DVD.”
4Press MEMORY again while the selected number is flashing on the display.
The selected number stops flashing.
The station is assigned to the selected preset number.
5Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a already used number erases the previously stored one.
7To tune in to a preset station
From the remote control ONLY:
1Press FM/AM repeatedly to select the band.
Each time you press the button, the band alternates between FM and AM (MW).
2Press the number buttons
select a preset channel number.
Ex.:
Press FM MODE while listening to an FM station.
The FM reception mode appears on the display.
Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”
•AUTO MUTING:
When a program is broadcast in stereo, you will hear it in stereo.
When in monaural, you will hear as monaural. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.
•MONO:
Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise until you are tuned in to a station. (The AUTO MUTING indicator also goes off.) The ST indicator goes off from the display.
Reducing the noise of AM (MW) broadcast
When listening to an AM (MW) broadcast with noise interference, you can change the Beat Cut mode to reduce the noise.
From the remote control ONLY:
•For channel number 3, press 3.
•For channel number 14, press +10 then 4.
(For FM stations only)
•For channel number 24, press +10, +10, then 4.
•For channel number 30, press +10, +10, then 10.
Selecting the FM reception mode
SLEEP |
|
|
|
| 7 + | 8 + | 9 + |
SETTING | |||
| – | – | – |
| 10 | 0 | +10 |
ADJUST TV RETURN | FM MODE | 100+ | |
TA/NEWS/INFO
ON |
|
SCREEN | DVD |
|
RDS
PTY( | ENTER | PTY9 |
|
| |
CHOICE |
| VFP |
RDS DISPLAY
PTY SEARCH
Set the remote control mode selector to “DVD.”
When a stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception.
•You can store the FM reception mode for each preset station. See “Using preset tuning” on page 22.
Press FM MODE while listening to an AM (MW) station.
The current Beat Cut mode appears on the display window. Each time you press the button, the Beat Cut mode alternates between “BEAT CUT 1” and “BEAT CUT 2.”
•Choose “BEAT CUT 1” or “BEAT CUT 2” whichever gives you clearer sound.
23