JVC SP-WA75, TH-A75R MP3 disc playback, Basic operation, 7NOTES for MP3 disc, 7To start playback

Page 54
MP3 disc playback

MP3 disc playback

This system can play MP3 tracks (files) recorded on a CD-R or CD-RW. We call such a disc “MP3 disc” in this manual.

•Before using the remote control, press DVD to change the remote control operation mode for the MP3 disc operations.

•When playing back an MP3 disc, set “MP3/JPEG” on the PICTURE menu of the choice menu to “MP3” (see page 57).

•Turn on your TV, and select the correct input mode on the TV.

If “ 7NOTES for MP3 disc ” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.

7NOTES for MP3 disc

•MP3 discs (either CD-R or CD-RW) require a longer read- out time. (The time differs depending on the complexity of the group (folder)/track (file) configuration.)

•When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as the disc format.

•This system supports “multi-session” discs (up to 5 sessions).

•This system can not play “packet write” discs.

•This system can play MP3 files only with the following file extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”

•ID3* tags cannot be shown on the display.

*An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded. There are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2).

•It is recommended that you make each MP3 file at a sampling rate of 44.1 kHz and at bit rate of 128 kbps. This system cannot play back files recorded at the rate of under 64 kbps.

•If both MP3 files and JPEG files are recorded on a disc, set the MP3/JPEG setting on the PICTURE menu to “MP3.” (See page 57.)

•Some MP3 discs may not be played back because of their disc characteristics or recording conditions.

Basic operation

NOTES:

•The following functions are not available for MP3 disc playback:

Program play, random play, repeat play, fast-forward/reverse playback, and using on-screen bar and choice menus

•Some tracks on an MP3 disc are skipped and may not be played back normally.

7To start playback

Load an MP3 disc, then press PLAY.

The system starts playback.

The following information appears on the display, and the MP3 CONTROL screen (see page 51) appears on the TV.

MP3 indicator

Current track number

 

 

 

 

 

 

 

MP3

 

L R

 

 

 

 

 

 

 

 

 

 

 

S.WFR

 

 

 

 

Current group

Elapsed playing time

 

number

of the current track

To stop playback temporarily

Press PAUSE (or 8 on the center unit).

To start playback again, press PLAY (or 3 on the center unit).

To skip groups forward

Press Cursor 3.

To skip groups backward

Press Cursor 2.

To skip tracks forward

Press FF/¢ or Cursor ∞ (or ¢ on the center unit) as many times as required.

To skip to the beginning of the current track Press 4/REW (or 4 on the center unit) once.

To skip tracks backward

Press 4/REW or Cursor 5 (or 4 on the center unit) as many times as required.

To stop playback completely

Press STOP (or 7 on the center unit).

From the remote control ONLY:

TA/NEWS/INFO

ON

SCREEN

DVDBasic operation

RDS

PTY(

ENTER

PTY9

 

 

CHOICE

 

VFP

RDS DISPLAY

 

 

 

 

PTY SEARCH

TV VOL CHANNEL/ZOOM

VOLUME

TV/VIDEO MUTING

1¡

/REW

PLAY

FF/

DOWN

TUNING

UP

O.T.

STOP

PAUSE

REPLAY

 

 

REC

MEMORY

STROBE

DIMMER

Set the remote control mode selector to “DVD.”

50

Page 53 Page 55
Image 54
Page 53 Page 55
Contents XV-THA75R SP-WA75SP-XSA75and SP-XCA75 TH-A75RWarnings, Cautions and Others IF IN DOUBT - CONSULT A COMPETENT ELECTRICIANCaution -- button Caution Proper Ventilation IMPORTANT FOR LASER PRODUCTSREPRODUCTION OF LABELS XV-THA75RSAFETY INSTRUCTIONS Table of contents 7Safety precautions PrecautionsChecking the supplied accessories IntroductionNames of parts and controls Center unitRemote control Names of parts and controls7About MP3 discs About discsPlayable disc types 7About JPEG discsPlayback Control function PBC About discsDisc structure Onlyfor VCD and SVCDGetting started Connecting a TV7To connect a TV through the AV SCART connectors Connections7AM MW loop antenna Connecting the AM MW and FM antennasGetting started Setting up AM MW loop antenna7FM antenna Connecting the supplied FM antennaIf reception is poor 7Before connecting the speaker cord Connecting the satellite speakers and subwooferSpeaker layout diagram 1 Press and hold the terminal clampSatellite speakers Attaching speakers to the brackets Installing the satellite speakers on the wall2Adjust the angle of the speakers Getting started7STB connection Connecting video components7VCR connection Before connecting aCAUTIONS Connecting the power cordGetting started LINK- S-VIDEOOperating the system using the remote control Using the remote controlPutting batteries in the remote control 2Insert batteries1Set the remote control mode selector to “DVD.” Operating a TV using the remote control7Setting the transmittable signal for your TV 2Press and hold TVSelecting the source to play Press AUDIO on the remote control orBasic operations Turning on the systemAdjusting the brightness Adjusting the output level of subwooferAdjusting the volume Press VOLUME +Press SLEEP Turning off the power with the sleep timerStoring basic adjustments- auto memory From the remote control ONLY5Activate preferred Surround or DSP mode 4Adjust the volumeBasic DVD player operations 1Press 0 on the center unitAbout the indications on the display Resume playback function see pagePreventing screen burn-out-screensaver function 7To store the preset stations Using preset tuningTuning in to stations manually Tuner operations7To tune in to a preset station Reducing the noise of AM MW broadcastSelecting the FM reception mode To show the RDS information 7What information can RDS signals provide?Tuner operations From the remote control ONLYTo search for a program using the PTY codes Searching for a program by PTY codesDescription of the PTY codes AlarmTuner operations News•When the system is in standby mode Setting speaker sizes Basic settingsOperating procedure software—EX/ESSetting the phase of subwoofer Setting the speaker distanceSetting the crossover frequency-CROSS PHASEAdjusting the tone-BASS,TREBLE Audio adjustmentsSetting the dynamic range Setting the subwoofer audio7Reproducing theater ambience Creating realistic sound fieldsSurround modes 7Introducing the Surround modesDolby Pro Logic Creating realistic sound fieldsDTS Surround Dolby Pro Logic Dolby SurroundDSP modes DAP Digital Acoustic Processor modesAll Channel Stereo Indicators 7Speaker and signal indicatorsIndicators Creating realistic sound fields1Start playing back software Using Surround modeUsing DSP mode 2 Press SURROUND4Press TEST again to stop the test tone Adjusting sound3Adjust the speaker output levels -10dB to +10 dB 5For DAP modes onlyShowing the on-screenbar Using the on-screenbarDVD player operations Press ON SCREENBasic operation through the on-screenbar DVD player operationsChanging the time information 1Press ON SCREEN twiceLocating a particular scene from the disc menu Locating a particular scene from the DVD menuShowing all view angles on the TV Selecting a view angleSelecting a view angle DVD player operationsSelecting the audio language Changing the subtitle and audio languagesSelecting the subtitle language 1Press SUBTITLESelecting the audio channel DVD player operationsLocating a particular position -Timesearch Playing from a particular positionLocating a particular chapter -Chaptersearch 1Press ON SCREEN twiceWhen a VCD or SVCD is loaded Locating a particular scene -DIGEST1Press DIGEST DVD player operationsFrame-by-frameplayback Special picture playbackShowing continuous still pictures 2Press and hold STROBE for more than 1 second2Press ¡ or Playing back in slow-motionZooming in and out 1Press ZOOM + to zoom in or ZOOM - to zoom outChanging the VFP setting 7To adjust the appearance of pictureGAMMA +0 5Press PLAY Playing back in the desired order-ProgramplayPlaying back in random order-Randomplay 4Repeat step 3 to program other tracksRepeat play Repeating title, chapter, or tracksRepeating a particular portion -A-Brepeat 7NOTES for MP3 disc MP3 disc playbackBasic operation 7To start playback7Operations Operating through the MP3 CONTROL screen7MP3 CONTROL screen 1Press Cursor 3/2 to select a group7NOTES for JPEG disc JPEG disc playbackSlide-show 7To start slide-showplayback7Operations Operating through the JPEG CONTROL screen7JPEG CONTROL screen 1Press Cursor 3/2 to select a groupChoice menus Using the choice menusConfiguration of the choice menus Operation buttons for the choice menus6Press ENTER Basic operating procedure1Press CHOICE 4Press ENTERLANGUAGE menu Using the choice menuLanguage codes list ¶AUDIO LANGUAGESelect one of the following settings PICTURE menuSelect one of the following settings Select one of the following settingsSelect one of the following settings AUDIO menuUsing the choice menu ¶L/R BALANCE¶LEVEL SPK. SETTING menu¶SIZE ¶DISTANCESelect one of the following settings OTHERS menuUsing the choice menu Select one of the following settingsSetting Parental Lock Restricting playback-ParentalLockChanging the setting of Parental Lock Releasing Parental Lock temporarilyUsing the choice menu Country/area codes list for Parental Lock 2Press and hold VCR 7Setting the transmittable signal for your VCROperating other manufacturers’ VCR 3 Press VCR CONTROLGeneral Notes MaintenanceCleaning the system Handling DiscsSOLUTION TroubleshootingPROBLEM GeneralSOLUTION DVD Playback FM/AMPROBLEM POSSIBLE CAUSEPROBLEM TroubleshootingMP3 Playback JPEG Playback SOLUTIONGlossary Output Power Specifications7Accessories 7Center unit XV-THA75RPage  2002 VICTOR COMPANY OF JAPAN, LIMITED 0902TMMMDWJEMVICTOR COMPANY OF JAPAN, LIMITED
Top Page Image Contents