JVC SP-WA75, TH-A75R, SP-XSA75, SP-XCA75, XV-THA75R manual Safety Instructions

Page 4
SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed covers as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case—this could result in a fatal electrical shock.

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

G-3

Image 4
Contents SP-WA75 SP-XSA75and SP-XCA75XV-THA75R TH-A75RIF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN Warnings, Cautions and OthersCaution -- button IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELSCaution Proper Ventilation XV-THA75RSAFETY INSTRUCTIONS Table of contents Precautions Checking the supplied accessories7Safety precautions IntroductionNames of parts and controls Center unitRemote control Names of parts and controlsAbout discs Playable disc types7About MP3 discs 7About JPEG discsAbout discs Disc structurePlayback Control function PBC Onlyfor VCD and SVCDConnecting a TV 7To connect a TV through the AV SCART connectorsGetting started ConnectionsConnecting the AM MW and FM antennas Getting started7AM MW loop antenna Setting up AM MW loop antennaConnecting the supplied FM antenna 7FM antennaIf reception is poor Connecting the satellite speakers and subwoofer Speaker layout diagram7Before connecting the speaker cord 1 Press and hold the terminal clampSatellite speakers Installing the satellite speakers on the wall 2Adjust the angle of the speakersAttaching speakers to the brackets Getting startedConnecting video components 7VCR connection7STB connection Before connecting aConnecting the power cord Getting startedCAUTIONS LINK- S-VIDEOUsing the remote control Putting batteries in the remote controlOperating the system using the remote control 2Insert batteriesOperating a TV using the remote control 7Setting the transmittable signal for your TV1Set the remote control mode selector to “DVD.” 2Press and hold TVPress AUDIO on the remote control or Basic operationsSelecting the source to play Turning on the systemAdjusting the output level of subwoofer Adjusting the volumeAdjusting the brightness Press VOLUME +Turning off the power with the sleep timer Storing basic adjustments- auto memoryPress SLEEP From the remote control ONLY4Adjust the volume Basic DVD player operations5Activate preferred Surround or DSP mode 1Press 0 on the center unitResume playback function see page About the indications on the displayPreventing screen burn-out-screensaver function Using preset tuning Tuning in to stations manually7To store the preset stations Tuner operationsReducing the noise of AM MW broadcast 7To tune in to a preset stationSelecting the FM reception mode 7What information can RDS signals provide? Tuner operationsTo show the RDS information From the remote control ONLYTo search for a program using the PTY codes Searching for a program by PTY codesAlarm Tuner operationsDescription of the PTY codes News•When the system is in standby mode Basic settings Operating procedureSetting speaker sizes software—EX/ESSetting the speaker distance Setting the crossover frequency-CROSSSetting the phase of subwoofer PHASEAudio adjustments Setting the dynamic rangeAdjusting the tone-BASS,TREBLE Setting the subwoofer audioCreating realistic sound fields Surround modes7Reproducing theater ambience 7Introducing the Surround modesCreating realistic sound fields DTS SurroundDolby Pro Logic Dolby Pro Logic Dolby SurroundDAP Digital Acoustic Processor modes DSP modesAll Channel Stereo 7Speaker and signal indicators IndicatorsIndicators Creating realistic sound fieldsUsing Surround mode Using DSP mode1Start playing back software 2 Press SURROUNDAdjusting sound 3Adjust the speaker output levels -10dB to +10 dB4Press TEST again to stop the test tone 5For DAP modes onlyUsing the on-screenbar DVD player operationsShowing the on-screenbar Press ON SCREENDVD player operations Changing the time informationBasic operation through the on-screenbar 1Press ON SCREEN twiceLocating a particular scene from the disc menu Locating a particular scene from the DVD menuSelecting a view angle Selecting a view angleShowing all view angles on the TV DVD player operationsChanging the subtitle and audio languages Selecting the subtitle languageSelecting the audio language 1Press SUBTITLESelecting the audio channel DVD player operationsPlaying from a particular position Locating a particular chapter -ChaptersearchLocating a particular position -Timesearch 1Press ON SCREEN twiceLocating a particular scene -DIGEST 1Press DIGESTWhen a VCD or SVCD is loaded DVD player operationsSpecial picture playback Showing continuous still picturesFrame-by-frameplayback 2Press and hold STROBE for more than 1 secondPlaying back in slow-motion Zooming in and out2Press ¡ or 1Press ZOOM + to zoom in or ZOOM - to zoom out7To adjust the appearance of picture Changing the VFP settingGAMMA +0 Playing back in the desired order-Programplay Playing back in random order-Randomplay5Press PLAY 4Repeat step 3 to program other tracksRepeating title, chapter, or tracks Repeat playRepeating a particular portion -A-Brepeat MP3 disc playback Basic operation7NOTES for MP3 disc 7To start playbackOperating through the MP3 CONTROL screen 7MP3 CONTROL screen7Operations 1Press Cursor 3/2 to select a groupJPEG disc playback Slide-show7NOTES for JPEG disc 7To start slide-showplaybackOperating through the JPEG CONTROL screen 7JPEG CONTROL screen7Operations 1Press Cursor 3/2 to select a groupUsing the choice menus Configuration of the choice menusChoice menus Operation buttons for the choice menusBasic operating procedure 1Press CHOICE6Press ENTER 4Press ENTERUsing the choice menu Language codes listLANGUAGE menu ¶AUDIO LANGUAGEPICTURE menu Select one of the following settingsSelect one of the following settings Select one of the following settingsAUDIO menu Using the choice menuSelect one of the following settings ¶L/R BALANCESPK. SETTING menu ¶SIZE¶LEVEL ¶DISTANCEOTHERS menu Using the choice menuSelect one of the following settings Select one of the following settingsSetting Parental Lock Restricting playback-ParentalLockReleasing Parental Lock temporarily Changing the setting of Parental LockUsing the choice menu Country/area codes list for Parental Lock 7Setting the transmittable signal for your VCR Operating other manufacturers’ VCR2Press and hold VCR 3 Press VCR CONTROLMaintenance Cleaning the systemGeneral Notes Handling DiscsTroubleshooting PROBLEMSOLUTION GeneralDVD Playback FM/AM PROBLEMSOLUTION POSSIBLE CAUSETroubleshooting MP3 Playback JPEG PlaybackPROBLEM SOLUTIONGlossary Specifications 7AccessoriesOutput Power 7Center unit XV-THA75RPage 0902TMMMDWJEM  2002 VICTOR COMPANY OF JAPAN, LIMITEDVICTOR COMPANY OF JAPAN, LIMITED