JVC SP-XSA75 JPEG disc playback, Slide-show, 7NOTES for JPEG disc, 7To start slide-showplayback

Page 56
JPEG disc playback

JPEG disc playback

This system can play JPEG files recorded on a CD-R or CD-RW. We call such a disc a “JPEG disc” in this manual.

Before using the remote control, press DVD to change the remote control operation mode for the JPEG disc operations.

When playing back a JPEG disc, set “MP3/JPEG” on the PICTURE menu of the choice menu to “JPEG” (see page 57).

Turn on your TV, and select the correct input mode on the TV.

If “ 7NOTES for JPEG disc ” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.

7NOTES for JPEG disc

From the remote control ONLY:

• JPEG discs (either CD-R or CD-RW) require a longer read-

out time. (The time differs depending on the complexity of

the group (folder)/file configuration.)

• When making a JPEG disc, select ISO 9660 Level 1 or

Level 2 as the disc format.

• This system supports “multi-session” discs (up to 5

sessions).

• This system cannot play “packet write” discs.

• This system can play JPEG files only with the following file

extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any upper

case and lower case combination (such as “.Jpg”).

• It is recommended to record a file at 640 x 480 resolution.

(If a file has been recorded at a resolution of more than 640

x 480, it will take a longer time to be shown.)

• If both JPEG files and MP3 files are recorded on a disc, set

the MP3/JPEG setting on the PICTURE menu to “JPEG.”

(See page 57.)

• This system can play only baseline JPEG files*. Progressive

JPEG files* or lossless JPEG files* cannot be played. Files

TA/NEWS/INFO

ON

SCREEN

DVD7To start slide-show playback

RDS

PTY(

ENTER

PTY9

 

 

CHOICE

 

VFP

RDS DISPLAY

 

 

 

 

PTY SEARCH

TV VOL CHANNEL/ZOOM

VOLUME

TV/VIDEO MUTING

1¡

/REW

PLAY

FF/

DOWN

TUNING

UP

O.T.

STOP

PAUSE

REPLAY

 

 

REC

MEMORY

STROBE

DIMMER

Set the remote control mode selector to “DVD.”

having other format may not be played back.

* Baseline JPEG format: Used for digital cameras, web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used now.

• Some JPEG discs may not be played back because of their

disc characteristics or recording conditions.

7To start slide-show playback

Load an JPEG disc, then press PLAY.

The slide-show playback starts.

Each file (still picture) is shown on the TV for about

3 seconds, then changed to the next file one after another. After all files of one group have been played, files of the next group are played back.

Slide-show

You can see the still pictures one after another automatically —slide-show.

Current group number Current file number

L R

S.WFR

NOTES:

The following functions are not available for JPEG disc playback:

Program play, random play, repeat play, fast-forward/reverse playback, and on-screen bar and choice menus

If a black screen continuously appears in the slide-show playback:

The file currently played may be non-baseline JPEG file. In this case, select a playable file (a baseline JPEG file) again. (e.g., pressing STOP or MENU to show the JPEG control screen, etc.)

Note that it may take a long time to select another file.

Some files on a JPEG disc may be shown distortedly.

To skip groups forward

Press Cursor 3.

To skip groups backward

Press Cursor 2.

To skip files forward

Press FF/¢ or Cursor (or ¢ on the center unit).

To skip files backward

Press 4/REW or Cursor 5 (or 4 on the center unit).

To stop slide-show playback temporarily

Press PAUSE (or 8 on the center unit).

To start slide-show playback again, press PLAY (or 3 on the center unit).

To stop slide-show playback

Press STOP (or 7 on the center unit).

The JPEG CONTROL screen appears on the TV screen.

NOTE:

Press buttons for operating after a whole picture appears on the display. The system cannot accept the operation even though you press buttons while showing a picture.

52

Image 56
Contents SP-WA75 SP-XSA75and SP-XCA75XV-THA75R TH-A75RCaution -- button Warnings, Cautions and OthersIF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELSCaution Proper Ventilation XV-THA75RSAFETY INSTRUCTIONS Table of contents Precautions Checking the supplied accessories7Safety precautions IntroductionNames of parts and controls Center unitRemote control Names of parts and controlsAbout discs Playable disc types7About MP3 discs 7About JPEG discsAbout discs Disc structurePlayback Control function PBC Onlyfor VCD and SVCDConnecting a TV 7To connect a TV through the AV SCART connectorsGetting started ConnectionsConnecting the AM MW and FM antennas Getting started7AM MW loop antenna Setting up AM MW loop antennaIf reception is poor 7FM antennaConnecting the supplied FM antenna Connecting the satellite speakers and subwoofer Speaker layout diagram7Before connecting the speaker cord 1 Press and hold the terminal clampSatellite speakers Installing the satellite speakers on the wall 2Adjust the angle of the speakersAttaching speakers to the brackets Getting startedConnecting video components 7VCR connection7STB connection Before connecting aConnecting the power cord Getting startedCAUTIONS LINK- S-VIDEOUsing the remote control Putting batteries in the remote controlOperating the system using the remote control 2Insert batteriesOperating a TV using the remote control 7Setting the transmittable signal for your TV1Set the remote control mode selector to “DVD.” 2Press and hold TVPress AUDIO on the remote control or Basic operationsSelecting the source to play Turning on the systemAdjusting the output level of subwoofer Adjusting the volumeAdjusting the brightness Press VOLUME +Turning off the power with the sleep timer Storing basic adjustments- auto memoryPress SLEEP From the remote control ONLY4Adjust the volume Basic DVD player operations5Activate preferred Surround or DSP mode 1Press 0 on the center unitPreventing screen burn-out-screensaver function About the indications on the displayResume playback function see page Using preset tuning Tuning in to stations manually7To store the preset stations Tuner operationsSelecting the FM reception mode 7To tune in to a preset stationReducing the noise of AM MW broadcast 7What information can RDS signals provide? Tuner operationsTo show the RDS information From the remote control ONLYTo search for a program using the PTY codes Searching for a program by PTY codesAlarm Tuner operationsDescription of the PTY codes News•When the system is in standby mode Basic settings Operating procedureSetting speaker sizes software—EX/ESSetting the speaker distance Setting the crossover frequency-CROSSSetting the phase of subwoofer PHASEAudio adjustments Setting the dynamic rangeAdjusting the tone-BASS,TREBLE Setting the subwoofer audioCreating realistic sound fields Surround modes7Reproducing theater ambience 7Introducing the Surround modesCreating realistic sound fields DTS SurroundDolby Pro Logic Dolby Pro Logic Dolby SurroundAll Channel Stereo DSP modesDAP Digital Acoustic Processor modes 7Speaker and signal indicators IndicatorsIndicators Creating realistic sound fieldsUsing Surround mode Using DSP mode1Start playing back software 2 Press SURROUNDAdjusting sound 3Adjust the speaker output levels -10dB to +10 dB4Press TEST again to stop the test tone 5For DAP modes onlyUsing the on-screenbar DVD player operationsShowing the on-screenbar Press ON SCREENDVD player operations Changing the time informationBasic operation through the on-screenbar 1Press ON SCREEN twiceLocating a particular scene from the disc menu Locating a particular scene from the DVD menuSelecting a view angle Selecting a view angleShowing all view angles on the TV DVD player operationsChanging the subtitle and audio languages Selecting the subtitle languageSelecting the audio language 1Press SUBTITLESelecting the audio channel DVD player operationsPlaying from a particular position Locating a particular chapter -ChaptersearchLocating a particular position -Timesearch 1Press ON SCREEN twiceLocating a particular scene -DIGEST 1Press DIGESTWhen a VCD or SVCD is loaded DVD player operationsSpecial picture playback Showing continuous still picturesFrame-by-frameplayback 2Press and hold STROBE for more than 1 secondPlaying back in slow-motion Zooming in and out2Press ¡ or 1Press ZOOM + to zoom in or ZOOM - to zoom outGAMMA +0 Changing the VFP setting7To adjust the appearance of picture Playing back in the desired order-Programplay Playing back in random order-Randomplay5Press PLAY 4Repeat step 3 to program other tracksRepeating a particular portion -A-Brepeat Repeat playRepeating title, chapter, or tracks MP3 disc playback Basic operation7NOTES for MP3 disc 7To start playbackOperating through the MP3 CONTROL screen 7MP3 CONTROL screen7Operations 1Press Cursor 3/2 to select a groupJPEG disc playback Slide-show7NOTES for JPEG disc 7To start slide-showplaybackOperating through the JPEG CONTROL screen 7JPEG CONTROL screen7Operations 1Press Cursor 3/2 to select a groupUsing the choice menus Configuration of the choice menusChoice menus Operation buttons for the choice menusBasic operating procedure 1Press CHOICE6Press ENTER 4Press ENTERUsing the choice menu Language codes listLANGUAGE menu ¶AUDIO LANGUAGEPICTURE menu Select one of the following settingsSelect one of the following settings Select one of the following settingsAUDIO menu Using the choice menuSelect one of the following settings ¶L/R BALANCESPK. SETTING menu ¶SIZE¶LEVEL ¶DISTANCEOTHERS menu Using the choice menuSelect one of the following settings Select one of the following settingsSetting Parental Lock Restricting playback-ParentalLockUsing the choice menu Changing the setting of Parental LockReleasing Parental Lock temporarily Country/area codes list for Parental Lock 7Setting the transmittable signal for your VCR Operating other manufacturers’ VCR2Press and hold VCR 3 Press VCR CONTROLMaintenance Cleaning the systemGeneral Notes Handling DiscsTroubleshooting PROBLEMSOLUTION GeneralDVD Playback FM/AM PROBLEMSOLUTION POSSIBLE CAUSETroubleshooting MP3 Playback JPEG PlaybackPROBLEM SOLUTIONGlossary Specifications 7AccessoriesOutput Power 7Center unit XV-THA75RPage VICTOR COMPANY OF JAPAN, LIMITED  2002 VICTOR COMPANY OF JAPAN, LIMITED0902TMMMDWJEM