Spin speed
Maximum spin speeds
Program | rpm |
Cottons Hygiene | 1400 |
Cottons Uni. | 1400 |
Minimum iron | 1000 |
Delicates | 600 |
Quick wash | 1400 |
Woollens | 1200 |
Silks | 400 |
Shirts | 600 |
Disinfection programs* | 1400 |
Kitchen linen* | 1400 |
Table linen* | 1200 |
Curtains* | 400 |
Pillows* | 1400 |
Outerwear* | 900 |
Proofing* | 800 |
Denim | 900 |
Toweling | 1400 |
Extra Rinse | 1200 |
Sluice* | 1400 |
Starch | 1400 |
Spin | 1400 |
*Programs can be added in "Settings - Supervisor level" when activated by Technical Service.
The final spin speed can be reduced. The speeds above are the highest available.
Rinse spin
The laundry is spun after the main wash and between the rinse cycles. Reducing the final spin speed will also reduce the rinse spin speeds.
Without final spin
Select "Rinse Stop" from the submenu "Extras". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program.
–Selecting the final spin
The washer is set by default to the maximum spin speed of the wash program. You can select a lower spin speed. Press "Start" to start the final spin.
–To finish the program
Press the button. The water will be drained. Press the door button to open the door.
Deselect rinse spin and final spin
Select "Without spin". The laundry is not spun after the final rinse but the water is drained away. After the drain cycle the washer goes immediately into the
24