Settings
Contrast / Brightness | Memory |
The contrast / brightness of the display can be set at ten different levels.
The contrast / brightness changes immediately when a different level is selected.
Confirm the setting with the jog shuttle.
Standby
The display goes out after
10 minutes and the "Start" button flashes slowly to save energy.
By turning the jog shuttle or pressing any button the display is turned on again.
On
The display will go into Standby mode:
–if no program is selected after the machine is turned on.
–after a program has started.
–at the end of a program.
Not in current prog. (default)
The Standby function will be turned on if no program is selected after the machine is turned on.
Off
The display stays on.
The Memory function remembers the addition of an extra feature to a program, a change in spin speed or temperature the next time that program is selected.
Once the wash program is selected again the washer shows the saved extras.
The memory function is not active when favorites are selected with the direct select buttons.
The Memory function is factory set "off".
Temperature unit
The temperature can be shown in "°C/Celsius" (factory default) or "°F/Fahrenheit".
The delivery status is "°C".
62