Miele 07 509 320 operating instructions Frequently asked questions, Wash program cannot be started

Page 37

Frequently asked questions

Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.

The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine:

A wash program cannot be started

Problem	Possible cause	Solution
The display remains off.	The washer has no	Possible fault:
	power.	– the washer is not
		connected to the electrical
		supply.
		– the circuit breaker has
		tripped.
When selecting the	The instructions in	Follow the instructions as
"Spin" program, the	"Before using for the	described in "Before using for
program does not start.	first time" were not	the first time".
	followed.
There is a fault	As long as an error	– Regard the display
message in the display.	message is	messages.
	displayed, a program	– Confirm by pressing the jog
	cannot be started.	shuttle.
The display is dark and	The machine goes	Press any direct select button.
the "Start" light flashes	into "Standby" mode.	The Standby function will end.
slowly.	The display shuts off
	to save energy.

37

Image 37

Contents Operating Instructions Washer PW 6065 Plus Contents Important Safety Instructions Important Safety Instructions Use Save These InstructionsControl panel Guide to the washerDisplay Direct select buttonsMain menu Display functionProgram selection possibility Menu Program selection SettingsBasic menu of a wash program Before using for the first time Sort the laundry UseGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause Detergent for Heavy Soil Using powder detergentAt the end of a program Starting a programTo change a program To cancel a programAdding/removing laundry during a wash program Drum door cannot be opened ifCottons Hygiene 203F to 158F 95C to 70C Max .3 lbs 6.5 kg Program guideCottons Uni F 60C to cold Max .3 lbs 6.5 kg Minimum iron 140F to 86F 60C to 30C Max .6 lbs 3.0 kgWoollens 104F 40C to cold Max .5 lbs 2.5 kg Quick wash 104F 40C to cold Max .7 lbs 3.5 kgSilks 86F 30C to cold Max .5 lbs 2.5 kg Shirts 140F 60C to cold Max .5 lbs 2.5 kgToweling 203F to 140F 95C to 60C Max .1 lbs 5.5 kg Denim 104F 40C to cold Max .7 lbs 3.5 kgStarch Max .3 lbs 6.5 kg Kitchen linen 203F to 140F 95C to 60C Max .3 lbs 6.5 kg Additional programsTable linen 140F to 86F 60C to 30C Max .5 lbs 2.5 kg Curtains 104F 40C to cold Max .6 lbs 3.0 kgProofing 104F to 86F 40C to 30C Max .6 lbs 3.0 kg Outerwear 104F 40C to cold Max .6 lbs 3.0 kgHygiene Disinfection programs Max .3 lbs 6.5 kgSluice 167F 75C or Sluice 146F 65C Max .3 lbs 4.0 kg Main wash Rinse Spin Program sequencePre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearMaximum spin speeds Spin speedRinse spin Without final spinExtras Accessing the submenu ExtrasPre-wash Starch StopIntensive Rinse StopWater plus Select the submenu Timer TimerSelect the Timer time Starting the TimerSelecting/Changing a Favorite FavoritesBasic menu Select a program Selecting a temperatureSelecting the spin speed Assigning a direct select button Saving a FavoriteWater hardness DetergentWater softener Normal soilingAutomatic dispensing of fabric softener or liquid starch Fabric softener, liquid starchDye removers / Fabric dyes Cleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning and Care Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsGeneral problems with the washer Poor wash results Door will not open when the button is pressed Max .5 gal 30 l Machines with a drain pumpOpen the drum door Machines with a drain valve PC Update After sales serviceOptional accessories RepairsInstallation Instructions Front view InstallationRear view Installation Installation siteRemoving the shipping struts Do not lift the washer by the drum doorInstallation Installing the shipping struts Leveling the washer Adjust the four leveling feetReinstallation of the machine lid Washer/ Dryer Stack Installation on a baseCoin mechanism Water connection MaintenanceCold water connection Extension hosesHot water connection Drain valve DrainageDrain pump Electrical connection Technical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings To adjust standard settings Opening the menu Settings SettingsSelecting Settings Leaving the Settings menuSuds cooling Language Time of daySelecting the clock Not in current prog. default Temperature unitContrast / Brightness Memory StandbyEntering the code Settings Supervisor levelConfirming the code Sort languages Language FavoritesSupervisor level Language menu LogoSave Intensive Water plusAuto load control Main wash water Pre-wash waterLow water pressure Water level Min. iron Wash time Cottons Water level CottonsPre-wash temp. Cot Wash time Min. ironQuick wash No. of programsHygiene DisinfectionPre-rinse Cottons 2nd pre-wash Kitchen linenNo. rinses Cottons No. rinses Min. ironLock External dispenser Spin free of chargeNo detergent Temp. reductionLeaving the Settings menu Delay StartControls Page Page Alteration rights reserved Nr 509 320