Miele 07 509 320 operating instructions Before using for the first time

Page 9

Before using for the first time

The appliance must be correctly installed and connected before the first use. Please see the "Installation instructions."

For safety reasons, it is not possible to run a spin cycle before the first use. A program must be run without laundry and detergent to flush out any residual water from the factory testing process.

Open the water supply.

Welcome screen

The Welcome screen shows when the washer is turned on for the first time: "Miele Professional Welcome".

The Welcome screen will not show after the washer has been running for more than 1 hour.

The display then shows the language selection.

Language

Select the desired language and confirm with "OK".

Shipping struts

The display reminds the user to remove the shipping struts.

If the shipping struts were already removed, confirm with the button. Otherwise, remove them at this time then confirm.

Set the time of day

Set the hour by turning the jog shuttle, press to confirm.

Repeat to set the minutes and confirm. Press again to save the time of day.

First wash

Select the program "Cottons Uni." and confirm.

The basic program "Cottons Uni." shows.

Press the flashing button "Start". The drum door must be closed.

Once the program ends the washer can be used for laundry.

9

Image 9

Contents Operating Instructions Washer PW 6065 Plus Contents Important Safety Instructions Important Safety Instructions Use Save These InstructionsControl panel Guide to the washerDisplay Direct select buttonsDisplay function Main menuProgram selection possibility Settings Menu Program selectionBasic menu of a wash program Before using for the first time Use Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause Detergent for Heavy Soil Using powder detergentAt the end of a program Starting a programTo change a program To cancel a programAdding/removing laundry during a wash program Drum door cannot be opened ifCottons Hygiene 203F to 158F 95C to 70C Max .3 lbs 6.5 kg Program guideCottons Uni F 60C to cold Max .3 lbs 6.5 kg Minimum iron 140F to 86F 60C to 30C Max .6 lbs 3.0 kgWoollens 104F 40C to cold Max .5 lbs 2.5 kg Quick wash 104F 40C to cold Max .7 lbs 3.5 kgSilks 86F 30C to cold Max .5 lbs 2.5 kg Shirts 140F 60C to cold Max .5 lbs 2.5 kgDenim 104F 40C to cold Max .7 lbs 3.5 kg Toweling 203F to 140F 95C to 60C Max .1 lbs 5.5 kgStarch Max .3 lbs 6.5 kg Kitchen linen 203F to 140F 95C to 60C Max .3 lbs 6.5 kg Additional programsTable linen 140F to 86F 60C to 30C Max .5 lbs 2.5 kg Curtains 104F 40C to cold Max .6 lbs 3.0 kgProofing 104F to 86F 40C to 30C Max .6 lbs 3.0 kg Outerwear 104F 40C to cold Max .6 lbs 3.0 kgDisinfection programs Max .3 lbs 6.5 kg HygieneSluice 167F 75C or Sluice 146F 65C Max .3 lbs 4.0 kg Main wash Rinse Spin Program sequencePre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearMaximum spin speeds Spin speedRinse spin Without final spinExtras Accessing the submenu ExtrasPre-wash Starch StopRinse Stop IntensiveWater plus Select the submenu Timer TimerSelect the Timer time Starting the TimerFavorites Selecting/Changing a FavoriteBasic menu Selecting a temperature Select a programSelecting the spin speed Assigning a direct select button Saving a FavoriteWater hardness DetergentWater softener Normal soilingAutomatic dispensing of fabric softener or liquid starch Fabric softener, liquid starchDye removers / Fabric dyes Cleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning and Care Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsGeneral problems with the washer Poor wash results Door will not open when the button is pressed Max .5 gal 30 l Machines with a drain pumpOpen the drum door Machines with a drain valve PC Update After sales serviceOptional accessories RepairsInstallation Instructions Front view InstallationRear view Installation Installation siteRemoving the shipping struts Do not lift the washer by the drum doorInstallation Installing the shipping struts Leveling the washer Adjust the four leveling feetWasher/ Dryer Stack Installation on a base Reinstallation of the machine lidCoin mechanism Water connection MaintenanceCold water connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings To adjust standard settings Opening the menu Settings SettingsSelecting Settings Leaving the Settings menuLanguage Time of day Suds coolingSelecting the clock Not in current prog. default Temperature unitContrast / Brightness Memory StandbyEntering the code Settings Supervisor levelConfirming the code Language Favorites Sort languagesSupervisor level Language menu LogoIntensive Water plus SaveAuto load control Pre-wash water Main wash waterLow water pressure Water level Min. iron Wash time Cottons Water level CottonsPre-wash temp. Cot Wash time Min. ironQuick wash No. of programsHygiene DisinfectionPre-rinse Cottons 2nd pre-wash Kitchen linenNo. rinses Cottons No. rinses Min. ironLock External dispenser Spin free of chargeNo detergent Temp. reductionDelay Start Leaving the Settings menuControls Page Page Alteration rights reserved Nr 509 320