Miele 07 509 320 operating instructions Pre-wash water, Main wash water, Low water pressure

Page 68

Settings - Supervisor level

Pre-wash water

Rinse water

The water type for the pre-wash can be selected (except for the program "Woolens, Silk, Curtains and Proofing"). The hot water intake will be only accessible at a wash temperature of 86°F (30°C) or higher.

This option is set to "hot" by default.

Main wash water

The water type for the main wash can be selected (except for the programs "Woollens", "Silk" "Curtains" and "Proofing"). The hot water intake will be only accessible at a wash temperature of 86°F (30°C) or higher.

This option is set to "hot" by default.

If the washer is not connected to hot water, the program running times will be extended and vary from the displayed remaining times.

If "Recycled water" is used, the washer must be refitted accordingly.

The water type for the rinse in the programs "Cottons Hygiene", "Cottons Uni.", "Minimum iron", "Kitchen linen", "Toweling" and "Sluice" can be selected. The hot water intake will be only accessible at a wash temperature of 50°C or higher.

This option is set to "hot" by default.

If "Recycled water" is used, the washer must be refitted accordingly.

Low water pressure

If the water pressure is always below

14.5psi this setting can be activated to ensure trouble free water intake.

This option is set to "Off" by default.

68

Image 68

Contents Operating Instructions Washer PW 6065 Plus Contents Important Safety Instructions Important Safety Instructions Save These Instructions UseGuide to the washer Control panelDisplay Direct select buttonsProgram selection possibility Display functionMain menu Basic menu of a wash program SettingsMenu Program selection Before using for the first time General tips UseSort the laundry Coin mechanism Load the washerSelect a program Too much detergent may cause Adding detergentToo little detergent may cause Using powder detergent Detergent for Heavy SoilStarting a program At the end of a programTo cancel a program To change a programAdding/removing laundry during a wash program Drum door cannot be opened ifProgram guide Cottons Hygiene 203F to 158F 95C to 70C Max .3 lbs 6.5 kgCottons Uni F 60C to cold Max .3 lbs 6.5 kg Minimum iron 140F to 86F 60C to 30C Max .6 lbs 3.0 kgQuick wash 104F 40C to cold Max .7 lbs 3.5 kg Woollens 104F 40C to cold Max .5 lbs 2.5 kgSilks 86F 30C to cold Max .5 lbs 2.5 kg Shirts 140F 60C to cold Max .5 lbs 2.5 kgStarch Max .3 lbs 6.5 kg Denim 104F 40C to cold Max .7 lbs 3.5 kgToweling 203F to 140F 95C to 60C Max .1 lbs 5.5 kg Additional programs Kitchen linen 203F to 140F 95C to 60C Max .3 lbs 6.5 kgTable linen 140F to 86F 60C to 30C Max .5 lbs 2.5 kg Curtains 104F 40C to cold Max .6 lbs 3.0 kgOuterwear 104F 40C to cold Max .6 lbs 3.0 kg Proofing 104F to 86F 40C to 30C Max .6 lbs 3.0 kgSluice 167F 75C or Sluice 146F 65C Max .3 lbs 4.0 kg Disinfection programs Max .3 lbs 6.5 kgHygiene Program sequence Main wash Rinse SpinSpecial features in the program sequence Anti-crease Pre-rinseHigh Spin OuterwearSpin speed Maximum spin speedsRinse spin Without final spinAccessing the submenu Extras ExtrasPre-wash Starch StopWater plus Rinse StopIntensive Timer Select the submenu TimerSelect the Timer time Starting the TimerBasic menu FavoritesSelecting/Changing a Favorite Selecting the spin speed Selecting a temperatureSelect a program Saving a Favorite Assigning a direct select buttonDetergent Water hardnessWater softener Normal soilingFabric softener, liquid starch Automatic dispensing of fabric softener or liquid starchDye removers / Fabric dyes Cleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning and Care Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the button is pressed Machines with a drain pump Max .5 gal 30 lOpen the drum door Machines with a drain valve After sales service PC UpdateOptional accessories RepairsInstallation Instructions Installation Front viewRear view Installation site InstallationRemoving the shipping struts Do not lift the washer by the drum doorInstallation Installing the shipping struts Adjust the four leveling feet Leveling the washerCoin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Maintenance Water connectionCold water connection Extension hosesHot water connection Drain pump DrainageDrain valve Electrical connection Technical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings To adjust standard settings Settings Opening the menu SettingsSelecting Settings Leaving the Settings menuSelecting the clock Language Time of daySuds cooling Temperature unit Not in current prog. defaultContrast / Brightness Memory StandbySettings Supervisor level Entering the codeConfirming the code Supervisor level Language FavoritesSort languages Logo Language menuAuto load control Intensive Water plusSave Low water pressure Pre-wash waterMain wash water Water level Cottons Water level Min. iron Wash time CottonsPre-wash temp. Cot Wash time Min. ironNo. of programs Quick washHygiene Disinfection2nd pre-wash Kitchen linen Pre-rinse CottonsNo. rinses Cottons No. rinses Min. ironSpin free of charge Lock External dispenserNo detergent Temp. reductionControls Delay StartLeaving the Settings menu Page Page Alteration rights reserved Nr 509 320