Installation
Water connection
Cold water connection
A water faucet with 3/4" thread must be provided
The water pressure must be between
14.5
(10 bar), a pressure reducer must be installed. If the water pressure is below 15 psi (1 bar), there will not be enough water available for a complete fill.
The cold water hose (blue mark) is not suitable for a hot water connection.
Connect the cold water intake hose (blue mark) to the cold water valve.
Turn on the valve(s) and check for leaks.
The water intake hoses are equipped with screen filters. Do not remove these filters except for cleaning.
Maintenance
Replace the water hoses only with genuine Miele hoses.
Extension hoses
Extension hoses (8’ 2" or 13’ [2.5 m or 4 m]) may be obtained from Miele.
53