Miele 07 509 320 operating instructions Washer/ Dryer Stack Installation on a base, Coin mechanism

Page 52

Installation

Washer/ Dryer Stack

Installation on a base

The Miele washing machine can be installed as part of a washer-dryer stack in combination with a Miele tumble dryer. An appropriate stacking kit* is required.

Installation of the stacking kit must be performed by a Miele Service Technician.

Reinstallation of the machine lid

When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for a safe transport of the dryer.

The machine can be installed on an open or closed steel base, or on a concrete base. Concrete is recommended.

Secure the two front feet of the washer with the supplied retaining clips when installing on a concrete base.

Read the supplied Installation manual.

Coin mechanism

The dryer can be equipped with a coin mechanism*.

The reprogramming necessary for the coin mechanism must be done by a Miele Service Technician.

Empty the coin mechanism regularly. Coins or tokens may get jammed.

Do not install devices to auto- matically turn the washer off, e.g. a clock timer. The washer must be connected to the power supply to open the door.

The supplied sticker must be affixed at or near by the washer: "This washer must be connected to the power supply to open the drum door. Do not use force to open the door."

*Available from your Miele dealer or Miele.

52

Image 52

Contents Operating Instructions Washer PW 6065 Plus Contents Important Safety Instructions Important Safety Instructions Save These Instructions UseGuide to the washer Control panelDisplay Direct select buttonsMain menu Display functionProgram selection possibility Menu Program selection SettingsBasic menu of a wash program Before using for the first time Sort the laundry UseGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause Using powder detergent Detergent for Heavy SoilStarting a program At the end of a programTo cancel a program To change a programAdding/removing laundry during a wash program Drum door cannot be opened ifProgram guide Cottons Hygiene 203F to 158F 95C to 70C Max .3 lbs 6.5 kgCottons Uni F 60C to cold Max .3 lbs 6.5 kg Minimum iron 140F to 86F 60C to 30C Max .6 lbs 3.0 kgQuick wash 104F 40C to cold Max .7 lbs 3.5 kg Woollens 104F 40C to cold Max .5 lbs 2.5 kgSilks 86F 30C to cold Max .5 lbs 2.5 kg Shirts 140F 60C to cold Max .5 lbs 2.5 kgToweling 203F to 140F 95C to 60C Max .1 lbs 5.5 kg Denim 104F 40C to cold Max .7 lbs 3.5 kgStarch Max .3 lbs 6.5 kg Additional programs Kitchen linen 203F to 140F 95C to 60C Max .3 lbs 6.5 kgTable linen 140F to 86F 60C to 30C Max .5 lbs 2.5 kg Curtains 104F 40C to cold Max .6 lbs 3.0 kgOuterwear 104F 40C to cold Max .6 lbs 3.0 kg Proofing 104F to 86F 40C to 30C Max .6 lbs 3.0 kgHygiene Disinfection programs Max .3 lbs 6.5 kgSluice 167F 75C or Sluice 146F 65C Max .3 lbs 4.0 kg Program sequence Main wash Rinse SpinSpecial features in the program sequence Anti-crease Pre-rinseHigh Spin OuterwearSpin speed Maximum spin speedsRinse spin Without final spinAccessing the submenu Extras ExtrasPre-wash Starch StopIntensive Rinse StopWater plus Timer Select the submenu TimerSelect the Timer time Starting the TimerSelecting/Changing a Favorite FavoritesBasic menu Select a program Selecting a temperatureSelecting the spin speed Saving a Favorite Assigning a direct select buttonDetergent Water hardnessWater softener Normal soilingFabric softener, liquid starch Automatic dispensing of fabric softener or liquid starchDye removers / Fabric dyes Cleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning and Care Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the button is pressed Machines with a drain pump Max .5 gal 30 lOpen the drum door Machines with a drain valve After sales service PC UpdateOptional accessories RepairsInstallation Instructions Installation Front viewRear view Installation site InstallationRemoving the shipping struts Do not lift the washer by the drum doorInstallation Installing the shipping struts Adjust the four leveling feet Leveling the washerReinstallation of the machine lid Washer/ Dryer Stack Installation on a baseCoin mechanism Maintenance Water connectionCold water connection Extension hosesHot water connection Drain valve DrainageDrain pump Electrical connection Technical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings To adjust standard settings Settings Opening the menu SettingsSelecting Settings Leaving the Settings menuSuds cooling Language Time of daySelecting the clock Temperature unit Not in current prog. defaultContrast / Brightness Memory StandbySettings Supervisor level Entering the codeConfirming the code Sort languages Language FavoritesSupervisor level Logo Language menuSave Intensive Water plusAuto load control Main wash water Pre-wash waterLow water pressure Water level Cottons Water level Min. iron Wash time CottonsPre-wash temp. Cot Wash time Min. ironNo. of programs Quick washHygiene Disinfection2nd pre-wash Kitchen linen Pre-rinse CottonsNo. rinses Cottons No. rinses Min. ironSpin free of charge Lock External dispenserNo detergent Temp. reductionLeaving the Settings menu Delay StartControls Page Page Alteration rights reserved Nr 509 320