Miele 07 509 320 operating instructions General problems with the washer

Page 38

Frequently asked questions

General problems with the washer

Problem

Possible cause

Solution

The washer shakes

– The four feet are not

– Level the machine (see

during the spin cycle.

resting evenly on the

Installation Instructions).

 

floor.

 

 

– The floor is not

– It is recommended that

 

properly reinforced.

the machine be installed

 

 

on a concrete base.

There are unusual

There is not a fault. Lapping sounds at the beginning

sounds coming from

and end of the pump process are normal.

the drain pump.

 

 

Large residues of

The water pressure is

– Check and clean the

detergent remain in the

too low.

filters in the water inlet

dispenser drawer.

 

hoses.

 

 

– Select the "Water plus"

 

 

Extra if desired.

 

Water softening

Clean the detergent

 

detergent additives tend

drawer. In the future add

 

to stick.

the detergent first and then

 

 

the water softener to the

 

 

compartment.

The fabric softener is

The siphon tube is either

Clean the siphon tube, see

not completely

incorrectly positioned or

"Cleaning and care-

dispensed or too much

clogged.

Cleaning the detergent

water remains in the

 

dispenser drawer".

compartment ￿.

 

 

The display shows a

A different language was

Select the desired

foreign language.

selected under

language. The flag symbol

 

"Settings-Language ￿".

leads you to the setting.

38

Image 38
Contents Operating Instructions Washer PW 6065 Plus Contents Important Safety Instructions Important Safety Instructions Save These Instructions UseDisplay Guide to the washerControl panel Direct select buttonsProgram selection possibility Display functionMain menu Basic menu of a wash program SettingsMenu Program selection Before using for the first time General tips UseSort the laundry Coin mechanism Load the washerSelect a program Too much detergent may cause Adding detergentToo little detergent may cause Using powder detergent Detergent for Heavy SoilStarting a program At the end of a programAdding/removing laundry during a wash program To cancel a programTo change a program Drum door cannot be opened ifCottons Uni F 60C to cold Max .3 lbs 6.5 kg Program guideCottons Hygiene 203F to 158F 95C to 70C Max .3 lbs 6.5 kg Minimum iron 140F to 86F 60C to 30C Max .6 lbs 3.0 kgSilks 86F 30C to cold Max .5 lbs 2.5 kg Quick wash 104F 40C to cold Max .7 lbs 3.5 kgWoollens 104F 40C to cold Max .5 lbs 2.5 kg Shirts 140F 60C to cold Max .5 lbs 2.5 kgStarch Max .3 lbs 6.5 kg Denim 104F 40C to cold Max .7 lbs 3.5 kgToweling 203F to 140F 95C to 60C Max .1 lbs 5.5 kg Table linen 140F to 86F 60C to 30C Max .5 lbs 2.5 kg Additional programsKitchen linen 203F to 140F 95C to 60C Max .3 lbs 6.5 kg Curtains 104F 40C to cold Max .6 lbs 3.0 kgOuterwear 104F 40C to cold Max .6 lbs 3.0 kg Proofing 104F to 86F 40C to 30C Max .6 lbs 3.0 kgSluice 167F 75C or Sluice 146F 65C Max .3 lbs 4.0 kg Disinfection programs Max .3 lbs 6.5 kgHygiene Program sequence Main wash Rinse SpinHigh Spin Special features in the program sequence Anti-creasePre-rinse OuterwearRinse spin Spin speedMaximum spin speeds Without final spinPre-wash Accessing the submenu ExtrasExtras Starch StopWater plus Rinse StopIntensive Select the Timer time TimerSelect the submenu Timer Starting the TimerBasic menu FavoritesSelecting/Changing a Favorite Selecting the spin speed Selecting a temperatureSelect a program Saving a Favorite Assigning a direct select buttonWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Automatic dispensing of fabric softener or liquid starchDye removers / Fabric dyes Cleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning and Care Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the button is pressed Machines with a drain pump Max .5 gal 30 lOpen the drum door Machines with a drain valve Optional accessories After sales servicePC Update RepairsInstallation Instructions Installation Front viewRear view Removing the shipping struts Installation siteInstallation Do not lift the washer by the drum doorInstallation Installing the shipping struts Adjust the four leveling feet Leveling the washerCoin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Cold water connection MaintenanceWater connection Extension hosesHot water connection Drain pump DrainageDrain valve Electrical connection Technical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings To adjust standard settings Selecting Settings SettingsOpening the menu Settings Leaving the Settings menuSelecting the clock Language Time of daySuds cooling Contrast / Brightness Memory Temperature unitNot in current prog. default StandbySettings Supervisor level Entering the codeConfirming the code Supervisor level Language FavoritesSort languages Logo Language menuAuto load control Intensive Water plusSave Low water pressure Pre-wash waterMain wash water Pre-wash temp. Cot Water level CottonsWater level Min. iron Wash time Cottons Wash time Min. ironHygiene No. of programsQuick wash DisinfectionNo. rinses Cottons 2nd pre-wash Kitchen linenPre-rinse Cottons No. rinses Min. ironNo detergent Spin free of chargeLock External dispenser Temp. reductionControls Delay StartLeaving the Settings menu Page Page Alteration rights reserved Nr 509 320