Miele T 8023 C installation instructions Start the program, At the end of a program

Page 11

Using the dryer

6. Start the program

Press the "Start/Stop" button.

Once the program starts, the current cycle of the program will be indicated in the "STATUS" display.

7. At the end of a program

The "End/Anti-crease" indicator will light at the end of a program and the buzzer will sound if it was selected.

If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details.

Press the "Door" button.

Open the door.

Remove the laundry.

Check that the drum is empty.

Clean the lint filter after each use (see "Dryer care").

Close the door.

Press the "On/Off" button to turn off the dryer.

Empty the condensed water container weekly (if not connected to a drain).

11

Image 11

Contents En US, CA Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyControl panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Available drying options Gentle, Anti-creaseAnti-crease Select a drying option if neededTurbo GentleSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Removing the condenser Cleaning the condenserRinsing the condenser Returning the Condenser Remove this guide for easy reference Quick GuideSelect a drying option if needed Quick GuideTurn on the dryer and load LaundryAt the end of a program Quick GuideNormal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb How do I prevent static cling? Frequently asked questionsWhat if the dryer will not run? Possible fault Solution What if the laundry is not dry enough? Possible fault MieleCare After sales servicePC Update RepairsInstallation Instructions Save These Instructions Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterRoom ventilation Installation tips Level the dryerExternal water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveInstall the connector 1 with the sink Disposal of an appliance Caring for the environmentDisposal of the packing materials All rights reserved Nr 460 400