Miele T 8023 C Canceling or changing a program, Adding or removing laundry during a program

Page 12

Using the dryer

Canceling or changing a program

Press and release the "Start/Stop" button to stop the drying program.

To continue drying:

Select the new program by pressing the or button.

Select any desired options.

Select a dryness level (available in the "Normal" and "Wrinkle-free" programs).

Press and release the "Start/Stop" button to start the new program.

Adding or removing laundry during a program

Turn off the dryer using the "On/Off" button.

Press the "Door" button.

Open the door.

CAUTION - Do not touch the rear of the drum while adding or removing items! There is a danger of burns due to high temperatures in the drum.

Add or remove items.

Close the door.

Turn the dryer back on with the "On/Off" button.

12

Image 12

Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Available drying options Gentle, Anti-crease Extra DrySelect a drying option if needed TurboGentle Anti-creaseTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programChild lock Child lockTo activate the child lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenserRinsing the condenser Returning the Condenser Quick Guide Remove this guide for easy referenceQuick Guide Turn on the dryer and loadLaundry Select a drying option if neededQuick Guide At the end of a programProgram When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault SolutionHow do I prevent static cling? What if the laundry is not dry enough? Possible fault After sales service PC UpdateRepairs MieleCareInstallation Instructions Save These Instructions Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Room ventilationInstalling the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeInstall the connector 1 with the sink Caring for the environment Disposal of the packing materialsDisposal of an appliance All rights reserved Nr 460 400