Miele T 8023 C installation instructions Rinsing the condenser Returning the Condenser

Page 18

Dryer care

Rinsing the condenser	Returning the Condenser
	Put the condenser back in place in
	the reverse order.
	Check that the gasket around the
	front of the condenser is flush and
	not crimped.
	To prevent leaks, make certain the
	condenser is pushed in all the way
	and locked in place.
	Restore power.

Rinse the condenser along the left side with warm water.

Rinse the condenser from the front with warm water.

Check the condenser for visible soiling. Rinse the condenser until clean.

Place the condenser lengthwise on a towel to air dry.

18

Image 18

Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Available drying options Gentle, Anti-crease Extra DryGentle Select a drying option if neededTurbo Anti-creaseTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenserRinsing the condenser Returning the Condenser Quick Guide Remove this guide for easy referenceLaundry Quick GuideTurn on the dryer and load Select a drying option if neededQuick Guide At the end of a programProgram When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault SolutionHow do I prevent static cling? What if the laundry is not dry enough? Possible fault Repairs After sales servicePC Update MieleCareInstallation Instructions Save These Instructions Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Room ventilationInstalling the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeInstall the connector 1 with the sink Caring for the environment Disposal of the packing materialsDisposal of an appliance All rights reserved Nr 460 400